The rpm --checksig command simply returned to the command prompt. That is, there was no output from the command, but there was no error, either.
When I run the md5sum command, it goes to the next line and seems to wait for input. It does not output anything that looks even remotely like the checksum (if that's what it is) that you show. I can cancel it by typing <CTRL>-c, but I still get no output. I think that maybe I should just go download the new iso file, just on general principals. Might as well be working with the latest version. Thanks, Paul >>> Mark Post <[EMAIL PROTECTED]> 10/31/2007 11:00 AM >>> >>> On Wed, Oct 31, 2007 at 10:49 AM, in message <[EMAIL PROTECTED]>, Paul Noble <[EMAIL PROTECTED]> wrote: -snip- > /sles10/sles10root/dvd1/suse/src/xalan-j2-2.6.0-21.2.src.rpm > lxsrc:/sles10 # > > So, the rpm files for xalan DO appear to be there, but it seems that the > install procedure on the target system is not looking for them in the right > place. Right? Nope, it's finding them, trust me. Remember, I wanted you to check the signatures on the RPM itself, but you didn't know where it was located. So now, rpm --checksig /sles10/sles10root/dvd1/suse/src/xalan-j2-2.6.0-21.2.src.rpm will see if the signatures are OK or not. Also, please run this command, while in the same directory as the .iso file: md5sum "SLES-10-IBM zSeries-DVD1.iso" ac2adb5a89be5d96d9142101429d619c SLES-10-IBM zSeries-DVD1.iso If the output doesn't match exactly, then you should download the .iso file again. (But this time, grab the Service Pack 1 version, not the GA version.) Finally, take a look at /var/log/YaST2/y2log and try to make some sense of that (it won't be easy). You may find some hints in there as to why it's not installing the package. Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
