Did you partition the disks you placed in the LVM? You need to use
/dev/dasdc1 rather than /dev/dasdc, as an example.

We install with everything except the /boot in LVM controlled filesystems,
splitting out /, /var, /tmp, /home, and /opt into their own filesystems.

--
Robert P. Nix          Mayo Foundation        .~.
RO-OE-5-55             200 First Street SW    /V\
507-284-0844           Rochester, MN 55905   /( )\
-----                                        ^^-^^
"In theory, theory and practice are the same, but
 in practice, theory and practice are different."




On 3/13/08 3:55 PM, "Collinson.Shannon" <[EMAIL PROTECTED]>
wrote:

> I was trying to do this with a new guest by putting the following
> directories in LVM (group "system" with one volume-204):
>
>
>
>             /usr
>
>             /var
>
>             /opt
>
>             /home
>
>
>
> The rest of the root filesystem (including /boot) is on a regular
> physical volume (200), and the swap disks are on two v-disks (201 and
> 202) and one physical disk (203).  Everything looks fine in the
> partitioner, but when I actually start the install and get to the
> "preparing your hard disk" panel, I get:
>
>
>
>       LVM Error
>
>       lvcreate -A n -i 5 -l 64 -n usr -l 359 system
>
> File descriptor 3 left open
>
>
>
> I thought it might be the striping, but I get the same error (with
> slightly different lvcreate parms) when I don't stripe.  I can't figure
> out what the problem is.  I'm hoping it's obvious to you guys...
>
>
>
> Also, I tried to set up the v-disks as FBA (using SWAPGEN) since I
> thought that was required for SLES9-64bit, but wound up having to use
> DIAG instead to get through Partitioner.  If anyone knows how to make
> FBA disks work for the initial install, let me in on the secret.
>
>
>
> I was able to effectively install SLES9-sp4 before I tried the funky
> stuff (vdisks and LVM), but we're trying to come up with a
> best-practices installation model, leading to new and exciting errors
> for the z/OS sysprog (me) to blindly stumble into.  If the actual answer
> to both of these problems is "you can't do that from here-get a good
> bare-bones install and then modify the server accordingly", I'll
> understand...  Thanks!
>
>
>
> Shannon Collinson l Mainframe Operating Systems l ETI l SunTrust Banks l
> 404.827.6070 (office) l 404.642.1280 (mobile)
>
> Seeing beyond money (sm)
>
>
>
> LEGAL DISCLAIMER
> The information transmitted is intended solely for the individual or entity to
> which it is addressed and may contain confidential and/or privileged material.
> Any review, retransmission, dissemination or other use of or taking action in
> reliance upon this information by persons or entities other than the intended
> recipient is prohibited. If you have received this email in error please
> contact the sender and delete the material from any computer.
>
> SunTrust and Seeing beyond money are federally registered service marks of
> SunTrust Banks, Inc.
> [ST:XCL]
>
>
>
>
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to