Hi all... I am a Linux newbie trying to install CentOS 4.6 Linux in a z9 LPAR. This is a no money, proof of concept type project.
We booted from the HMC DVD drive, ran thru the install, and loaded the applications via ftp. Everything seemed to go smooth until we shutdown and booted from disk. Linux comes up and seems to be fine from the HMC console but we no longer have network connectivity (OSA Express2-FEth non-QDIO). From Linux it can ping itself, but nothing on the outside. From the outside, FTP, telnet, and ping all time out trying to connect to Linux. I looked at /etc/sysconfig/network-scripts/ifcfg-eth0 and did a "ifconfig eth0" command but don't see anything obviously wrong (although I haven't found out what it is using for a router/gateway yet). Right now I don't know where to check other tcpip parms like gateway, etc. Has anyone had a similar problem or can you tell me some things to check? I don't speak much Linux but there are a couple of guys here that can help. Thanks for any info, Robert Johnston UAMS - Little Rock, AR Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
