Has anyone successfully installed SLES11 using a Layer2 vswitch? I've installed using layer3 vswitch then migrated to a layer2. Also installed via hipersockets. But can't do an install on a layer2 switch. checking CCW address 0.0.1d00
checking CCW address 0.0.1d01 checking CCW address 0.0.1d02 (portname vswtch1) (Layer2) qeth.933eb7: register layer 2 discipline (Port 0) qdio: 0.0.1d02 OSA on SC 3 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA:RW AO qeth.e13e5b: 0.0.1d00: MAC address 02:00:85:00:00:06 successfully registered on device eth0 qeth.736dae: 0.0.1d00: Device is a Guest LAN QDIO card (level: V541) with link type GuestLAN QDIO (portname: vswtch1) ccwgroup 0.0.1d00 has network IF eth0 *** glibc detected *** /init: free(): invalid pointer: 0x000003ffff8ea4e4 *** Kernel panic - not syncing: Attempted to kill init! HCPGIR450W CP entered; disabled wait PSW 00020001 80000000 00000000 00110E8A My parm file. ramdisk_size=131072 root=/dev/ram1 ro init=/linuxrc TERM=dumb HostIP=199.44.xxx.xx Gateway=199.44.xxx.x Nameserver=199.44.xx.xx HostName=host.domain OSAHWaddr=02-00-85-00-00-06 InstNetDev=osa Netmask=255.255.255.128 Broadcast=199.44.xxx.xxx OsaInterface=qdio OsaMedium=eth Layer2=1 ReadChannel=0.0.1d00 Writechannel=0.0.1d01 DataChannel=0.0.1d02 Portname=vswtch1 PortNo=0 Install=ftp://user:[email protected]/DVD1 UseSSH=1 SSHPassword=pass linuxrclog=/dev/console -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
