Thank you, Thorsten. That worked. On Fri, Apr 3, 2009 at 5:26 AM, Thorsten Diehl <[email protected]>wrote:
> Hi Mark, > > please omit the OSAHWaddr! However, in that case booting the instsys > will not run unattended anymore. When the setup routine asks for the MAC > address, please leave it blank (press enter twice under z/VM) and the > remainder should work. > > By the way, it has been a good practice to limit the parmfile to 9 > lines; maybe that this restriction is no more valid. > > With kind regards > Thorsten Diehl > > System Test Linux on System z > > IBM Deutschland Research & Development GmbH > Vorsitzender des Aufsichtsrats: Martin Jetter > Geschaeftsfuehrung: Erich Baier > Sitz der Gesellschaft: Boeblingen > Registergericht: Amtsgericht Stuttgart, HRB 243294 > > > Mark Pace schrieb am 02.04.2009 21:49: > >> Has anyone successfully installed SLES11 using a Layer2 vswitch? I've >> installed using layer3 vswitch then migrated to a layer2. Also installed >> via hipersockets. But can't do an install on a layer2 switch. >> checking CCW address 0.0.1d00 >> >> checking CCW address 0.0.1d01 >> >> checking CCW address 0.0.1d02 >> >> (portname vswtch1) >> >> (Layer2) >> >> qeth.933eb7: register layer 2 discipline >> >> (Port 0) >> >> qdio: 0.0.1d02 OSA on SC 3 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA:RW AO >> >> qeth.e13e5b: 0.0.1d00: MAC address 02:00:85:00:00:06 successfully >> registered >> on device eth0 >> qeth.736dae: 0.0.1d00: Device is a Guest LAN QDIO card (level: V541) >> >> with link type GuestLAN QDIO (portname: vswtch1) >> >> ccwgroup 0.0.1d00 has network IF eth0 >> >> *** glibc detected *** /init: free(): invalid pointer: 0x000003ffff8ea4e4 >> *** >> Kernel panic - not syncing: Attempted to kill init! >> >> HCPGIR450W CP entered; disabled wait PSW 00020001 80000000 00000000 >> 00110E8A >> >> My parm file. >> ramdisk_size=131072 root=/dev/ram1 ro init=/linuxrc TERM=dumb >> HostIP=199.44.xxx.xx Gateway=199.44.xxx.x Nameserver=199.44.xx.xx >> HostName=host.domain OSAHWaddr=02-00-85-00-00-06 >> InstNetDev=osa Netmask=255.255.255.128 Broadcast=199.44.xxx.xxx >> OsaInterface=qdio OsaMedium=eth Layer2=1 >> ReadChannel=0.0.1d00 Writechannel=0.0.1d01 DataChannel=0.0.1d02 >> Portname=vswtch1 PortNo=0 >> Install=ftp://user:[email protected]/DVD1 >> UseSSH=1 SSHPassword=pass >> linuxrclog=/dev/console >> -- >> Mark Pace >> Mainline Information Systems >> 1700 Summit Lake Drive >> Tallahassee, FL. 32317 >> >> ---------------------------------------------------------------------- >> For LINUX-390 subscribe / signoff / archive access instructions, >> send email to [email protected] with the message: INFO LINUX-390 or >> visit >> http://www.marist.edu/htbin/wlvindex?LINUX-390 >> > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
