hi, did anyone report this to novell and got an answer how they want to handle this in the future?
regards, tobias doerkes. >Mark Pace >Fri, 03 Apr 2009 04:21:56 -0700 > >Thank you, Thorsten. That worked. > >On Fri, Apr 3, 2009 at 5:26 AM, Thorsten Diehl wrote: > >> Hi Mark, >> >> please omit the OSAHWaddr! However, in that case booting the instsys >> will not run unattended anymore. When the setup routine asks for the MAC >> address, please leave it blank (press enter twice under z/VM) and the >> remainder should work. >> >> By the way, it has been a good practice to limit the parmfile to 9 >> lines; maybe that this restriction is no more valid. >> >> With kind regards >> Thorsten Diehl >> >> System Test Linux on System z >> >> IBM Deutschland Research & Development GmbH >> Vorsitzender des Aufsichtsrats: Martin Jetter >> Geschaeftsfuehrung: Erich Baier >> Sitz der Gesellschaft: Boeblingen >> Registergericht: Amtsgericht Stuttgart, HRB 243294 >> >> >> Mark Pace schrieb am 02.04.2009 21:49: >> >>> Has anyone successfully installed SLES11 using a Layer2 vswitch? I've >>> installed using layer3 vswitch then migrated to a layer2. Also installed >>> via hipersockets. But can't do an install on a layer2 switch. >>> checking CCW address 0.0.1d00 >>> >>> checking CCW address 0.0.1d01 >>> >>> checking CCW address 0.0.1d02 >>> >>> (portname vswtch1) >>> >>> (Layer2) >>> >>> qeth.933eb7: register layer 2 discipline >>> >>> (Port 0) >>> >>> qdio: 0.0.1d02 OSA on SC 3 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA:RW AO >>> >>> qeth.e13e5b: 0.0.1d00: MAC address 02:00:85:00:00:06 successfully >>> registered >>> on device eth0 >>> qeth.736dae: 0.0.1d00: Device is a Guest LAN QDIO card (level: V541) >>> >>> with link type GuestLAN QDIO (portname: vswtch1) >>> >>> ccwgroup 0.0.1d00 has network IF eth0 >>> >>> *** glibc detected *** /init: free(): invalid pointer: 0x000003ffff8ea4e4 >>> *** >>> Kernel panic - not syncing: Attempted to kill init! >>> >>> HCPGIR450W CP entered; disabled wait PSW 00020001 80000000 00000000 >>> 00110E8A >>> >>> My parm file. >>> ramdisk_size=131072 root=/dev/ram1 ro init=/linuxrc TERM=dumb >>> HostIP=199.44.xxx.xx Gateway=199.44.xxx.x Nameserver=199.44.xx.xx >>> HostName=host.domain OSAHWaddr=02-00-85-00-00-06 >>> InstNetDev=osa Netmask=255.255.255.128 Broadcast=199.44.xxx.xxx >>> OsaInterface=qdio OsaMedium=eth Layer2=1 >>> ReadChannel=0.0.1d00 Writechannel=0.0.1d01 DataChannel=0.0.1d02 >>> Portname=vswtch1 PortNo=0 >>> Install=ftp://user:[email protected]/DVD1 >>> UseSSH=1 SSHPassword=pass >>> linuxrclog=/dev/console >>> -- >>> Mark Pace >>> Mainline Information Systems >>> 1700 Summit Lake Drive >>> Tallahassee, FL. 32317 >>> >>> ---------------------------------------------------------------------- >>> For LINUX-390 subscribe / signoff / archive access instructions, >>> send email to [email protected] with the message: INFO LINUX-390 or >>> visit >>> http://www.marist.edu/htbin/wlvindex?LINUX-390 >>> >> >> ---------------------------------------------------------------------- >> For LINUX-390 subscribe / signoff / archive access instructions, >> send email to [email protected] with the message: INFO LINUX-390 or >> visit >> http://www.marist.edu/htbin/wlvindex?LINUX-390 >> > > > >-- >Mark Pace >Mainline Information Systems >1700 Summit Lake Drive >Tallahassee, FL. 32317 > >---------------------------------------------------------------------- >For LINUX-390 subscribe / signoff / archive access instructions, >send email to [email protected] with the message: INFO LINUX-390 or visit >http://www.marist.edu/htbin/wlvindex?LINUX-390 _________________________________________________________________ Drag n’ drop—Get easy photo sharing with Windows Live™ Photos. http://www.microsoft.com/windows/windowslive/products/photos.aspx ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
