Sven:

echo 1 > /sys/devices/system/cpu/cpu1/online                                    
cpu 1 phys_idx=1 vers=FF ident=01CF8C machine=2097 unused=8000                  
Aug 27 10:46:39 l20bp kernel: cpu 1 phys_idx=1 vers=FF ident=01CF8C machine=2097
 unused=8000                                                                    
l20bp:~ # 01: HCPGSP2629I The virtual machine is placed in CP mode due to a SIGP
 stop from                                                                      
 CPU 01.                                                                        
Processor 1 spun down                                                           
Aug 27 10:46:50 l20bp kernel: Processor 1 spun down                             

Is there a way to check is could be a hardware error? At the VM operator 
console, there is no messages regarding the CPU.

Víctor Echavarry 
System Programmer
Technology Systems & Operations Division
EVERTEC



-----Original Message-----
From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Sven 
Schuetz
Sent: Friday, August 27, 2010 10:44 AM
To: [email protected]
Subject: Re: CPU problem

AFAIK you can (and should) omit the

vmcp begin cpu 1

And just bring the CPU online in Linux by putting a 1 into

/sys/devices/system/cpu/cpu1/online

Good luck!
Sven

On 27/08/10 16:11, Victor Echavarry Diaz wrote:
> vmcp begin cpu 1
>

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/


-----------------------------------------
CONFIDENTIALITY NOTE: This email communication and its attachments
contain information that are proprietary and confidential to
EVERTEC, INC., its affiliates or its clients.  They may not be
disclosed, distributed, used, copied or modified in any way without
EVERTEC, Inc.’s authorization. If you are not the intended
recipient of this email, you are not an authorized person.  Please
delete it and notify the sender immediately. EVERTEC, Inc. and its
affiliates do not assume any liability for damages resulting from
emails that have been sent or altered without their consent.
Moreover, EVERTEC, Inc. has taken precautions to safeguard its
email communications, but cannot assure that such is the case and
disclaim any responsibility attributable thereto.

Reply via email to