Hi Berry, found the problem in /sbin/qeth_configure. It enforces a definition for the layer2 attribute, which is not applicable for OSN-devices. You might edit the created udev rule in /etc/udev/rules.d/51-qeth... and remove the layer2 line. Anyway, the problem should be reported to SuSE. Will you do this yourself or should we follow up on this?
Regards, Ursula Braun, IBM Germany On Tue, 2012-11-06 at 10:44 +0000, van Sleeuwen, Berry wrote: > At first I've copied the rule from the vswitch connection and configured the > udev > rule according to the configuration we had on the SLES9 machine, including the > portno and layer2 rules. When that didn't work I did try to configure with > yast, > but that didn't work either, basically with the same error: > "stderr":"/sbin/qeth_configure: line 280: echo: write error: Input/output > error > \n", "stdout":"Could not set device 0.0.efac online\n"] > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
