Hi , Have a doubt. Is it possible to install RHEL 5.8 on ZVM 6.2?
Thanks in advance.. Regards, Srinivas G -----Original Message----- From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Ursula Braun Sent: Wednesday, November 07, 2012 2:45 PM To: [email protected] Subject: Re: CCL OSA device not activated Hi Berry, found the problem in /sbin/qeth_configure. It enforces a definition for the layer2 attribute, which is not applicable for OSN-devices. You might edit the created udev rule in /etc/udev/rules.d/51-qeth... and remove the layer2 line. Anyway, the problem should be reported to SuSE. Will you do this yourself or should we follow up on this? Regards, Ursula Braun, IBM Germany On Tue, 2012-11-06 at 10:44 +0000, van Sleeuwen, Berry wrote: > At first I've copied the rule from the vswitch connection and > configured the udev rule according to the configuration we had on the > SLES9 machine, including the portno and layer2 rules. When that didn't > work I did try to configure with yast, but that didn't work either, basically > with the same error: > "stderr":"/sbin/qeth_configure: line 280: echo: write error: > Input/output error \n", "stdout":"Could not set device 0.0.efac > online\n"] > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/ **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***
