Dear Hendrik, Here is the /proc/cmdline:
root=/dev/disk/by-path/ccw-0.0.0201-part1 TERM=dumb vmpoff=LOGOFF vmhalt=LOGOFF state=/local readonlyroot console=hvc0 hvc_iucv=8 hvc_iucv_allow=LINADMIN1 console=ttyS0 BOOT_IMAGE=1 BTW: I see that even there are running all agetty processes, I can only connect to hvc0 (lnxhvc0). When I try the others I get a connection refused. BR Florian On Mon, Mar 4, 2013 at 11:28 AM, Hendrik Brueckner < [email protected]> wrote: > Dear Florian, > > On Mon, Mar 04, 2013 at 11:17:16AM +0100, Florian Bilek wrote: > > > > This is the new configuration provided by SP2: agetty started by > > /sbin/ttyrun. However I tried it already also with mingetty as it had it > > before. > > > > h0:2345:respawn:/sbin/ttyrun hvc0 /sbin/agetty -L 9600 %t linux > > h1:2345:respawn:/sbin/ttyrun hvc1 /sbin/agetty -L 9600 %t linux > > h2:2345:respawn:/sbin/ttyrun hvc2 /sbin/agetty -L 9600 %t linux > > h3:2345:respawn:/sbin/ttyrun hvc3 /sbin/agetty -L 9600 %t linux > > h4:2345:respawn:/sbin/ttyrun hvc4 /sbin/agetty -L 9600 %t linux > > h5:2345:respawn:/sbin/ttyrun hvc5 /sbin/agetty -L 9600 %t linux > > h6:2345:respawn:/sbin/ttyrun hvc6 /sbin/agetty -L 9600 %t linux > > h7:2345:respawn:/sbin/ttyrun hvc7 /sbin/agetty -L 9600 %t linux > > Fine, agetty is a good choice anyway. One more question, did you > enable the hvc0 as linux console, i.e., adding a console=hvc0 to > the kernel command line? (It would be great if you could include > the output of the /proc/cmdline). If you use it as a console, > does the problem also occur on other hvc devices, for example, > lnxhvc1? > > Thanks and kind regards, > Hendrik > > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
