Dear Hendrik, This behavior as on hvc0 is the same on hvc1 and higher.
BR Florian On Mon, Mar 4, 2013 at 6:22 PM, Florian Bilek <[email protected]>wrote: > In addition I have figured out: > > In case I restart the connection with iucvconn again, the cursor goes to a > new empty line. It is possible to enter there the password (hidden) and > then press Enter. This avoids the invalid login as I mentioned during my > first mail. > > BR > Florian > > > > On Mon, Mar 4, 2013 at 12:21 PM, Florian Bilek <[email protected]>wrote: > >> Dear Hendrik, >> >> Here is the /proc/cmdline: >> >> root=/dev/disk/by-path/ccw-0.0.0201-part1 TERM=dumb vmpoff=LOGOFF >> vmhalt=LOGOFF state=/local readonlyroot console=hvc0 hvc_iucv=8 >> hvc_iucv_allow=LINADMIN1 console=ttyS0 BOOT_IMAGE=1 >> >> BTW: I see that even there are running all agetty processes, I can only >> connect to hvc0 (lnxhvc0). When I try the others I get a connection >> refused. >> >> BR Florian >> >> >> On Mon, Mar 4, 2013 at 11:28 AM, Hendrik Brueckner < >> [email protected]> wrote: >> >>> Dear Florian, >>> >>> On Mon, Mar 04, 2013 at 11:17:16AM +0100, Florian Bilek wrote: >>> > >>> > This is the new configuration provided by SP2: agetty started by >>> > /sbin/ttyrun. However I tried it already also with mingetty as it had >>> it >>> > before. >>> > >>> > h0:2345:respawn:/sbin/ttyrun hvc0 /sbin/agetty -L 9600 %t linux >>> > h1:2345:respawn:/sbin/ttyrun hvc1 /sbin/agetty -L 9600 %t linux >>> > h2:2345:respawn:/sbin/ttyrun hvc2 /sbin/agetty -L 9600 %t linux >>> > h3:2345:respawn:/sbin/ttyrun hvc3 /sbin/agetty -L 9600 %t linux >>> > h4:2345:respawn:/sbin/ttyrun hvc4 /sbin/agetty -L 9600 %t linux >>> > h5:2345:respawn:/sbin/ttyrun hvc5 /sbin/agetty -L 9600 %t linux >>> > h6:2345:respawn:/sbin/ttyrun hvc6 /sbin/agetty -L 9600 %t linux >>> > h7:2345:respawn:/sbin/ttyrun hvc7 /sbin/agetty -L 9600 %t linux >>> >>> Fine, agetty is a good choice anyway. One more question, did you >>> enable the hvc0 as linux console, i.e., adding a console=hvc0 to >>> the kernel command line? (It would be great if you could include >>> the output of the /proc/cmdline). If you use it as a console, >>> does the problem also occur on other hvc devices, for example, >>> lnxhvc1? >>> >>> Thanks and kind regards, >>> Hendrik >>> >> -- Best regards Florian Bilek ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
