We just solved that installation problem. There is a recommendation to use cio_ignore=all,!condev in the GENERIC PRM file used at booting the install. But this also rules out the console on 0009 that is needed at the end of the installation. It should be: "cio_ignore=all,!0.0009"
Then it works :) BR /Tore From: Agblad Tore Sent: den 8 augusti 2014 1:18 To: Linux on 390 Port ([email protected]) Subject: RHEL7 install problems someone ? Hi, I'm trying to install RHEL7, but the post install steps run into some kind of problem and it crashes. Anybody having done a successful installation, or even better also had such a problem and managed to get a workaround ? Have tried a number of times both via vnc and via ssh. Same result. BR /Tore ________________________________________________ Tore Agblad System programmer, Volvo IT certified IT Architect Volvo Information Technology SE-405 08, Gothenburg Sweden E-mail: [email protected]<mailto:[email protected]> http://www.volvo.com/volvoit/global/en-gb/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
