I have the same problem with Network and DASD devices that I add, I am not sure
of the proper procedure but I had to add the network device to the Rules files
in
/etc/udev/rules.d/70-persistent-net.rules
I have also had to add rules for each new DASD device so it is available after
an IPL or reboot
Larry Davis,
VM Capability
-----Original Message-----
From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Christer
Solskogen
Sent: Tuesday, November 10, 2015 4:58 AM
To: [email protected]
Subject: SLES12 - yast does not create a udev rule
Hi!
I've setup the network in YaST, but the device does not start automagicly when
I reboot the machine (running as a guest in z/VM). I was pretty sure that YaST
would create a file under /etc/udev/rules.d called 51-qeth-0.0.0603.rules (or
something) - the address is 603,604 and 605.
I can get the device to work if I run znetconf -a 603 manually.
Help, please!
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions, send email to
[email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit http://wiki.linuxvm.org/
