On Wednesday, 06/29/2016 at 04:17 GMT, Mark Post <[email protected]> wrote: > >>> On 6/29/2016 at 05:42 AM, "van Sleeuwen, Berry" <[email protected]> > wrote: > > A few months ago we have moved to a z13 and zVM 6.3. All machines were moved > > successfully. But we now have problems with SLES10 SP4 machines. > > Ah, this is most likely the cause of your problem. Because SLES10 was EOL (and we don't have a > z13), we didn't test it on a z13. IBM, however, has told us to expect problems with data > corruption/loss in such an environment.
If your OS doesn't support the z13, don't run it on the z13. Depending on your z13 hw configuration, any operating system that does not explicitly support the z13 will very likely fail. It could be a noisy abend, a hang, or silent data corruption. The only solution is to upgrade the OS to a supported level. One of my clients hit this when they went to GA2 and upgraded to a bigger model. Alan Altmark Senior Managing z/VM and Linux Consultant Lab Services System z Delivery Practice IBM Systems & Technology Group ibm.com/systems/services/labservices office: 607.429.3323 mobile; 607.321.7556 [email protected] IBM Endicott ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
