I recommend you validate the 3 devices

Q v 360-362


And checks that are attach to the guest.

Because I don't see device 361 on its output.

Atte

Victor Hugo Ochoa Avila
IBM de México





El jue., 3 de junio de 2021 7:08 p. m., Victor Echavarry <
[email protected]> escribió:

> I receive a call from some server are disconnecting from the LAN.
>
> Checking with q vswitch shows no connection
>
> q vswitch vsw4 user l244p
> VSWITCH SYSTEM VSW4       Type: QDIO    Connected: 42   Maxconn: INFINITE
>   PERSISTENT  RESTRICTED    ETHERNET                  Accounting: OFF
>   USERBASED LOCAL
>   VLAN Aware  Default VLAN: 0001    Default Porttype: Access
>               Native  VLAN: 0001    VLAN Counters: OFF
>   MAC address: 02-8C-06-00-00-04    MAC Protection: Unspecified
>   IPTimeout: 5         QueueStorage: 8
>   Isolation Status: OFF        VEPA Status: OFF
>  Uplink Port:
>   State: Ready                         PriQueuing: OFF
>   PMTUD setting: EXTERNAL   PMTUD value: 9000     Trace Pages: 8
>   RDEV: B0E0.P00 VDEV: 0612 Controller: DTCVSW2  ACTIVE
>         Adapter ID: 39060001FCD8.0144
>         EQID: CORPVLAN
>   RDEV: B0C0.P00 VDEV: 060F Controller: DTCVSW1  BACKUP
>         Adapter ID: 39060001FCD8.01B8
>         EQID: CORPVLAN
>   RDEV: B1F0.P01 VDEV: 060F Controller: DTCVSW2  BACKUP
>         Adapter ID: 39060001FCD8.0148
>         EQID: CORPVLAN
>  Adapter Connections:                            Connected: 42
>     Adapter Owner: L244P    NIC: 0360.P00 Name: UNASSIGNED  Type: QDIO
>       PQUplinkTX: Normal
>       Porttype: Access
>       RX Packets: 0          Discarded: 0          Errors: 0
>       TX Packets: 0          Discarded: 0          Errors: 0
>       RX Bytes: 0                    TX Bytes: 0
>       Device: 0362  Unit: 002   Role: DATA       Port: 2202
> Ready; T=0.01/0.01 13:11:16
>
>
> Executing an UNCOUPLE and a COUPLE although said connected, the card do
> nothing.
>
> 00:
> 00: CP UNCOUPLE 0360
> 00: NIC 0360 is disconnected from VSWITCH SYSTEM VSW4
> 00:
> 00: CP COUPLE 0360 TO SYSTEM VSW4
> 00: NIC 0360 is connected to VSWITCH SYSTEM VSW4
>
> Doing a portnum remove, not successful.
>
> set vswitch vsw4 portnum remove 2202
> HCPSWS2858I L244P connection to SYSTEM VSW4 has been revoked by MAINT720.
> Command complete
> Ready; T=0.01/0.01 13:14:47
>
> IFCONFIG shows no ETH0
>
> ifconfig
> eth1      Link encap:Ethernet  HWaddr 02:78:C1:02:44:01
>           inet addr:10.101.33.48  Bcast:10.101.39.255  Mask:255.255.248.0
>           inet6 addr: fe80::278:c100:202:4401/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1492  Metric:1
>           RX packets:87836 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:605 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:7277974 (6.9 Mb)  TX bytes:133146 (130.0 Kb)
>
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:65536  Metric:1
>           RX packets:325 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:325 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:35386 (34.5 Kb)  TX bytes:35386 (34.5 Kb)
>
> If I IPL the guest the issue is solve. Does anyone has this issue before,
> is not all servers under the same LPAR. We are running z/VM 7.2 and SLES 12.
>
> Regards,
>
> Victor Echavarry Díaz
> System Programmer
> Operating Systems
> t. 787.759.9999  Ext. 3401
> [email protected]<mailto:[email protected]>
> [cid:[email protected]]
>
>
> WARNING: This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom they are
> addressed. If you have received this email in error please delete it
> immediately. Please note that any views or opinions presented in this email
> are solely those of the author and do not necessarily represent those of
> EVERTEC, Inc. or its affiliates. Finally, the integrity and security of
> this message cannot be guaranteed on the Internet, and as such EVERTEC,
> Inc. and its affiliates accept no liability for any damage caused by any
> virus transmitted by this email.
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO LINUX-390 or
> visit
> http://www2.marist.edu/htbin/wlvindex?LINUX-390
>

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www2.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to