Allan: Do you get errors when you manually bring the interface up? Said no ETH0 card exist. This happened with the issue I wrote this e-mail. The strange thing, this issue affect all the Linux guest on one VM, one group recover, the others, no. Checking with IBM for errors at VM side, shows no console error.
Regards, Victor Echavarry System Programmer Operating Systems EVERTEC, LLC -----Original Message----- From: Linux on 390 Port <[email protected]> On Behalf Of Alan Altmark Sent: Monday, June 7, 2021 8:32 AM To: [email protected] Subject: Re: Guest disconnection CAUTION EXTERNAL EMAIL: DO NOT open attachments or click on links from unknown senders or unexpected emails. The guest is still connected to the VSWITCH and the virtual NIC has been initialized, but ithe guest is not transmitting anything on the interface. The lack of any TX packets indicates that the guest doesn't know what IP address to assign. On an ETHERNET mode vNIC, we would see gratuitous ARP packets on an "ifup". Do you get errors when you manually bring the interface up? As an aside, I observe that you have the VSWITCH defined "VLAN 1 NATIVE 1". I have said repeatedly, here and elsewhere, use NATIVE NONE. Anyone who thinks they need to transmit untagged frames on a trunk port should discuss that with their switch admins -- you are putting your physical switch at risk. I suspect you're not plugged into a trunk port, and by coding VLAN 1 NATIVE 1, you are forcing all NICs on VLAN 1 to be transmitted without tags. That works because the switch port is actually an access port. Regards, Alan Alan Altmark Senior Managing z/VM Consultant IBM Lab Services Phone: 607-429-3323 | Mobile: 607-321-7556 E-mail: [email protected] Endicott, NY USA Linux on 390 Port <[email protected]> wrote on 06/03/2021 01:22:09 PM: > From: Victor Echavarry <[email protected]> > To: [email protected] > Date: 06/03/2021 08:08 PM > Subject: [EXTERNAL] [LINUX-390] Guest disconnection Sent by: Linux on > 390 Port <[email protected]> > > I receive a call from some server are disconnecting from the LAN. > > Checking with q vswitch shows no connection > > q vswitch vsw4 user l244p > VSWITCH SYSTEM VSW4 Type: QDIO Connected: 42 Maxconn: INFINITE > PERSISTENT RESTRICTED ETHERNET Accounting: OFF > USERBASED LOCAL > VLAN Aware Default VLAN: 0001 Default Porttype: Access > Native VLAN: 0001 VLAN Counters: OFF > MAC address: 02-8C-06-00-00-04 MAC Protection: Unspecified > IPTimeout: 5 QueueStorage: 8 > Isolation Status: OFF VEPA Status: OFF > Uplink Port: > State: Ready PriQueuing: OFF > PMTUD setting: EXTERNAL PMTUD value: 9000 Trace Pages: 8 > RDEV: B0E0.P00 VDEV: 0612 Controller: DTCVSW2 ACTIVE > Adapter ID: 39060001FCD8.0144 > EQID: CORPVLAN > RDEV: B0C0.P00 VDEV: 060F Controller: DTCVSW1 BACKUP > Adapter ID: 39060001FCD8.01B8 > EQID: CORPVLAN > RDEV: B1F0.P01 VDEV: 060F Controller: DTCVSW2 BACKUP > Adapter ID: 39060001FCD8.0148 > EQID: CORPVLAN > Adapter Connections: Connected: 42 > Adapter Owner: L244P NIC: 0360.P00 Name: UNASSIGNED Type: QDIO > PQUplinkTX: Normal > Porttype: Access > RX Packets: 0 Discarded: 0 Errors: 0 > TX Packets: 0 Discarded: 0 Errors: 0 > RX Bytes: 0 TX Bytes: 0 > Device: 0362 Unit: 002 Role: DATA Port: 2202 > Ready; T=0.01/0.01 13:11:16 > > > Executing an UNCOUPLE and a COUPLE although said connected, the card > do nothing. > > 00: > 00: CP UNCOUPLE 0360 > 00: NIC 0360 is disconnected from VSWITCH SYSTEM VSW4 > 00: > 00: CP COUPLE 0360 TO SYSTEM VSW4 > 00: NIC 0360 is connected to VSWITCH SYSTEM VSW4 > > Doing a portnum remove, not successful. > > set vswitch vsw4 portnum remove 2202 > HCPSWS2858I L244P connection to SYSTEM VSW4 has been revoked by MAINT720. > Command complete > Ready; T=0.01/0.01 13:14:47 > > IFCONFIG shows no ETH0 > > ifconfig > eth1 Link encap:Ethernet HWaddr 02:78:C1:02:44:01 > inet addr:10.101.33.48 Bcast:10.101.39.255 Mask:255.255.248.0 > inet6 addr: fe80::278:c100:202:4401/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1492 Metric:1 > RX packets:87836 errors:0 dropped:0 overruns:0 frame:0 > TX packets:605 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:7277974 (6.9 Mb) TX bytes:133146 (130.0 Kb) > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:65536 Metric:1 > RX packets:325 errors:0 dropped:0 overruns:0 frame:0 > TX packets:325 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:35386 (34.5 Kb) TX bytes:35386 (34.5 Kb) > > If I IPL the guest the issue is solve. Does anyone has this issue > before, is not all servers under the same LPAR. We are running z/VM > 7.2 and SLES 12. > > Regards, > > Victor Echavarry Díaz > System Programmer > Operating Systems > t. 787.759.9999 Ext. 3401 > [email protected]<mailto:[email protected] > > > [cid:[email protected]] > > > WARNING: This email and any files transmitted with it are confidential > and intended solely for the use of the individual or entity to whom > they are addressed. If you have received this email in error please > delete it immediately. Please note that any views or opinions > presented in this email are solely those of the author and do not > necessarily represent those of EVERTEC, Inc. or its affiliates. > Finally, the integrity and security of this message cannot be > guaranteed on the Internet, and as such EVERTEC, Inc. and its > affiliates accept no liability for any damage caused by any virus > transmitted by this email. > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, send > email to [email protected] with the message: INFO LINUX-390 or visit > INVALID URI REMOVED > u=http-3A__www2.marist.edu_htbin_wlvindex-3FLINUX-2D390&d=DwIFAw&c=jf_iaSHvJObTbx- > siA1ZOg&r=XX3LPhXj6Fv4hkzdpbonTd1gcy88ea- > vqLQGEWWoD4M&m=hS6Vgpg2AUvIDlrK9frB3foZ_c1p5cgj0UzbR4c14Ic&s=CpVqVybb- > Paklxrt2MqpfHLZLNZcZZmo9VO6gK4DZgE&e= > [attachment "image001.png" deleted by Alan Altmark/Endicott/IBM] ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww2.marist.edu%2Fhtbin%2Fwlvindex%3FLINUX-390&data=04%7C01%7CVictor.Echavarry%40evertecinc.com%7C13fdee653d0b4a25fc9e08d929b0801b%7C2b5b7d77f19b4c6db1805768c09ad43b%7C0%7C0%7C637586660307499192%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=L11VnodMk3NJAhgjc8zc2M6kMj4OhP3AHm4u1RvQZ08%3D&reserved=0 WARNING: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please delete it immediately. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of EVERTEC, Inc. or its affiliates. Finally, the integrity and security of this message cannot be guaranteed on the Internet, and as such EVERTEC, Inc. and its affiliates accept no liability for any damage caused by any virus transmitted by this email. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www2.marist.edu/htbin/wlvindex?LINUX-390
