Re: [LINUX-ABIT] slightly OT: stupid newbie question

[Rogier Wolff]

john s jacobs anderson wrote:
>   Rogier> - the heatsink isn't touching the CPU.

[...]

> I had it on the "back".

The heatsink goes on the front.

I just grabbed the slot-1 celeron that I have, and it has "intel"
"celeron" on two corners on the back, and a big chip and several
capacitors, resistors on the front. The big heatsink and the fan goes
on the front side, the metal clip on the back.

The heatsink will be touching the center metal part of the chip, and
leave a tenth of an inch clearance for the board on the rest.

                        Roger.

-- 
** [EMAIL PROTECTED] ** http://www.BitWizard.nl/ ** +31-15-2137555 **
*-- BitWizard writes Linux device drivers for any device you may have! --*
 "I didn't say it was your fault. I said I was going to blame it on you."
--
=-          To unsubscribe, email [EMAIL PROTECTED] with the       -=
=-                body of "unsubscribe linux-abit".                 -=