Hello,
> > Everything is stable running 2.2.15pre series kernels.
> > I am not using the HTP366 controller, and do not use the NOAPIC boot parm
...
> > > Before I've used 2.2.15pre17 + 3c59x 0.99L - downloaded from
...
> Now with this 0.99L driver it looks like I do not have to use noapic
> option anymore - I'm stressing the computer really hard
> and no hda:lost interrupt messages are in my sight.
Well, with the hardware you mentioned in your previous note (G400, sblive,
etc) it seems we have almost the same setup, the only difference is the
NIC's we have. Software-wise, I have been using the devel kernels as of
late, since kernels <= 2.2.14 didn't make a difference in stability. Maybe
I ought to give the 2.2pre15 series a shot.
On another note, which PCI slots do you have your cards in? And just to
clarify, am I correct in noting that PCI slot 1 is the one directly under
the AGP slot, and slot 5 is the one right above the ISA slot? Just
checking =)
-Eric
--
=- To unsubscribe, email [EMAIL PROTECTED] with the -=
=- body of "unsubscribe linux-abit". -=
