On Sun, Sep 03, 2000 at 12:41:05PM +0200, thus said Zlatko Calusic:
> I experience a strange behavior on my BP6 after I have put second
> drive in my computer. Now, every time I power up the computer, after
> it has been off for a longer time (hours), it won't boot. I have to
> turn it off (pressing button for 4 seconds) than turn it on again, and
> only then it boots.
>
> First drive is IBM DPTA 13.5GB 7200 UDMA66 (on HPT366), and now I have
> added Maxtor 32305H3 20GB 5400 UDMA33 on standard interface.
>
> Does anybody have any idea why it happens?
>
> I will gladly supply other data that could be of help while debugging
> this strangeness.
Could be that the Maxtor takes a longer time to start up, and bios misses
it? If it is that, I think there is a bios setting to add time to wait for
the HD's to spin up on startup. Of course it could be something else as
well.
Tuomas
--
.- Linux spectrolite 2.2.17pre20-ben1 #1 Wed Aug 30 00:13:02 EEST 2000 ppc unknown
`--> 0:41pm up 17 min, 3 users, load average: 0.00, 0.12, 0.14
.---( t i g e r t @ g i m p . o r g )---.
| some stuff at http://tigert.gimp.org/ |
`---------------------------------------'
--
=- To unsubscribe, email [EMAIL PROTECTED] with the -=
=- body of "unsubscribe linux-abit". -=
