Hello, > I am trying to program the CPLD in Assabet. > To do this I require a Xlinx Cool runner. Cool Runner is the name of the CPLD series. In order to program it, you need the Xilinx CPLD Web Pack.
> I have downloaded > the tool . I > don't have the Xlinx cable with me . If I getone then how do > I connect it to > the Assabet? Is the cable format of Xlinx and Assabet the same ?? Yupp, you can use the the parallel port plug of the Assabet cable. You need to start the "XPLA Device programmer" which comes with the WebPack. In the pink status window you should see the cable detect status: Checking ISP download cable/Board connection... ISP HyperCable/Board found! There are 3 JTAG devices daisy chainning in the system. Now you just have to set up the 3 devices, or you simply load the Assabet.jcd configuration file provided by intel along with the board, and you can program the CPLDs. Regards, Thilo -- Thilo A. Fromm, Hardware Development DResearch Digital Media Systems GmbH Otto-Schmirgal-Str. 3, 10319 Berlin, Germany Tel: +49 (30) 515932-221 mailto:[EMAIL PROTECTED] Fax: +49 (30) 515932-299 http://www.dresearch.de _______________________________________________ http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm Please visit the above address for information on this list.
