Let me explain the problem. I downloaded Xlinx Web pack 4.1. I used the Assabet base station header which connects the JTAG with the PC's parallel port. Now I choose Device programming in the Xlinx Web pack 4.1. Then out of 4 options 1. Boundary scan 2. Slave Serial 3. Select map 4. Load the configuration file (.cdf)
I selected the Boundary scan and next I selected Automatic cable detection . A window opens up . Welcome to IMPACT ! The Intelligent multipurpose programming tool Boundary scan mode selected Autodetecting cable Please wait Connecting to cable (USB port) Cable connection failed Connecting to cable (Parallel port - LPT1) Cable connection failed ............................... ............................... What am I missing here ?? Next there is one more connection cable that comes along with neponset board. This is a parallel to JTAG connector. It connects to J8 in the Neponset. This is essentially for programming only one CPLD because the tool chain ends there in PZ3128-128. Harishankkar Member Technical Staff, GDA Technologies, Chennai -600018 Ph 4993832 4661653 www.gdatech.co.in _______________________________________________ http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm Please visit the above address for information on this list.
