Diego
I believe it will be useful for many of us if you share your diald
configuration files in the case SyncPPP&2.2.x kernel.
Bye
Hristo Bobev
> -----Urspr�ngliche Nachricht-----
> Von: Diego Cortassa [mailto:[EMAIL PROTECTED]]
> Gesendet: Donnerstag, 7. Oktober 1999 20:27
> An: Mike Jagdis; [EMAIL PROTECTED]
> Betreff: Re: SyncPPP with Diald
>
>
> Mike Jagdis wrote:
> >
>
> > > Does anyone have any experience with isdn4linux and
> diald, or any other
> > > auto-dial for linux?
> > > Does it work for a start? I'm using kernel 2.0.36, do I
> realy need the
> > > ethertap interface thats provided in 2.2.x kernels.
> > To do ISDN you need to configure interfaces before hand
> > but *without* addresses. You run diald with "mode dev" and
> > "device ippp<n>" (repeated for each ippp interface you
> > want it to try. Your connect script should drop phone
> > numbers onto the interface it is passed, do an "isdnctrl dial ...",
> > and wait for the *right* addresses to appear on the interface.
> > (If the wrong addresses appear you probably just answered
> > an incoming call for another link...). Your disconnect
> > script will need to hang up the interface and ifconfig
> > it to 0.0.0.0 (to remove the address). You could down the
> > interface *if* you don't want to be able to accept incoming
> > calls.
>
> Why do you say we have to configure the ippp interface
> *whithout* an ip
> address ? I configured a lot of linux redhat + diald servers
> (about 40)
> with or without dinamic ip but I never cared to delete the last ip the
> ippp got... I had some problems when I started to use 2.2.x kernel
> because of the "auto add route to interface" feature but I resolved
> them... If you want I can send you my conf, addroute etc. files...
> please send me yours.
>
> --
> Bye
> Diego Cortassa
> --------------------------------------
> Linux Systems Administrator
> LogX s.r.l. [EMAIL PROTECTED]
> Intranet/Internet Solutions Provider
> Via Villarbasse, 25 - Reano (TO) Italy
> Tel: +39-0119310703 Fax:+39-0119310807
> http://www.logx-srl.com
>
> -
> To unsubscribe from this list: send the line "unsubscribe
> linux-diald" in
> the body of a message to [EMAIL PROTECTED]
>
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
