|
Try
adding
*.=debug
/var/log/debug
to
your syslog, then putting debug in /etc/options.ttyS0, this will log the LCP
between
your
machine and the ISP.
Perhaps somehow your ttyS0 device defaults to 7 bit
ascii, instead of 8 bit. Sorry, dunno how to change though.
Hi
I sent this message a few days ago but I think
i may have left out a few words, as I have not seemed to have gotten any
replies. So I am sending it out again. If anyone can help me with this
problem, please let me know. Thanks
I am having a few problems configuring diald to dial a different
ISP
My setup works fine at the moment using my current setup, but I wish to
move over to a different ISP as the one I am currently using is very
slow and is giving me constant problems. I am running RH 5.2 with diald .066.
I change all the nessescary settings as recommended by the new ISP but it
fails to connect. Both ISP's use PAP, so all I basically changed was the info
in pap-secrets and diald.conf file. and the connect script
Here is the output of my log when it tries to connect.
Oct 6 15:42:21 orion diald[347]: Running pppd (pid =
31674).
Oct 6 15:42:21 orion kernel: PPP: version 2.2.0 (dynamic
channel allocation)
Oct 6 15:42:21 orion kernel: PPP Dynamic channel
allocation code copyright 199$
Oct 6 15:42:21 orion kernel: PPP line
discipline registered.
Oct 6 15:42:21 orion kernel: registered device
ppp0
Oct 6 15:42:21 orion pppd[31674]: pppd 2.3.5 started by root,
uid 0
Oct 6 15:42:21 orion pppd[31674]: Using interface
ppp0
Oct 6 15:42:21 orion pppd[31674]: Connect: ppp0 <-->
/dev/ttyS0
Oct 6 15:42:51 orion pppd[31674]: LCP: timeout sending
Config-Requests
Oct 6 15:42:51 orion pppd[31674]: Connection
terminated.
Oct 6 15:42:51 orion pppd[31674]: Receive serial link is
not 8-bit clean:
Oct 6 15:42:51 orion pppd[31674]: Problem: all had
even parity
Oct 6 15:42:51 orion pppd[31674]: Hangup
(SIGHUP)
Any Help would be appricaited.
Thanks
Matt
|
