Hi,
I had the same kind of problem with LCP things. I did something with the
setserial command. like
setserial 80039 /dev/cua1 (something like that)( I don't recal what the
exact number was, but it had something to do with a UART).
This fixed the problem for me.
Matt
On Fri, 8 Oct 1999, Jason Morgan wrote:
> Date: Fri, 8 Oct 1999 14:16:07 +0100
> From: Jason Morgan <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: RE: Re : Diald With new ISP
>
> Try adding
>
> *.=debug /var/log/debug
>
> to your syslog, then putting debug in /etc/options.ttyS0, this will log the
> LCP between
> your machine and the ISP.
>
> Perhaps somehow your ttyS0 device defaults to 7 bit ascii, instead of 8 bit.
> Sorry, dunno how to change though.
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Matthew Van Wyk
> Sent: 08 October 1999 13:18
> To: [EMAIL PROTECTED]
> Subject: Re : Diald With new ISP
>
>
> Hi
> I sent this message a few days ago but I think i may have left out a few
> words, as I have not seemed to have gotten any replies. So I am sending it
> out again. If anyone can help me with this problem, please let me know.
> Thanks
>
>
> I am having a few problems configuring diald to dial a different ISP
> My setup works fine at the moment using my current setup, but I wish to
> move over to a different ISP as the one I am currently using is very slow
> and is giving me constant problems. I am running RH 5.2 with diald .066. I
> change all the nessescary settings as recommended by the new ISP but it
> fails to connect. Both ISP's use PAP, so all I basically changed was the
> info in pap-secrets and diald.conf file. and the connect script
>
> Here is the output of my log when it tries to connect.
>
> Oct 6 15:42:21 orion diald[347]: Running pppd (pid = 31674).
> Oct 6 15:42:21 orion kernel: PPP: version 2.2.0 (dynamic channel
> allocation)
> Oct 6 15:42:21 orion kernel: PPP Dynamic channel allocation code
> copyright 199$
> Oct 6 15:42:21 orion kernel: PPP line discipline registered.
> Oct 6 15:42:21 orion kernel: registered device ppp0
> Oct 6 15:42:21 orion pppd[31674]: pppd 2.3.5 started by root, uid 0
> Oct 6 15:42:21 orion pppd[31674]: Using interface ppp0
> Oct 6 15:42:21 orion pppd[31674]: Connect: ppp0 <--> /dev/ttyS0
> Oct 6 15:42:51 orion pppd[31674]: LCP: timeout sending Config-Requests
> Oct 6 15:42:51 orion pppd[31674]: Connection terminated.
> Oct 6 15:42:51 orion pppd[31674]: Receive serial link is not 8-bit clean:
> Oct 6 15:42:51 orion pppd[31674]: Problem: all had even parity
> Oct 6 15:42:51 orion pppd[31674]: Hangup (SIGHUP)
>
> Any Help would be appricaited.
>
> Thanks
> Matt
>
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
