|
Hi Jason
I tried this but the file is empty, there was no
/etc/options.ttyS0 file so created one and just put 'debug' on the first line.
Is this right?. I added the
'*.=debug
/var/log/debug' to the /etc/syslog.conf file.
I dont actually understand y the port would change its
settings. I didn't touch the modem settings or port settings, all i changed was
the phone number to dial and the information in the pap-secrets file. So it
should work, unless AT&T Worldnet have some strange form of pap, but thet
have assured me it works, I use pap in a 95 machine and there is no problem.
Any help would be appreciated.
Thanks
Regards
Matthew Van Wyk
New Horizons, Durban
----- Original Message -----
Sent: Friday, October 08, 1999 3:16
PM
Subject: RE: Re : Diald With new
ISP
Try
adding
*.=debug
/var/log/debug
to
your syslog, then putting debug in /etc/options.ttyS0, this will log the LCP
between
your
machine and the ISP.
Perhaps somehow your ttyS0 device defaults to 7 bit
ascii, instead of 8 bit. Sorry, dunno how to change
though.
Hi
I sent this message a few days ago but I
think i may have left out a few words, as I have not seemed to have gotten
any replies. So I am sending it out again. If anyone can help me with this
problem, please let me know. Thanks
I am having a few problems configuring diald to dial a different
ISP
My setup works fine at the moment using my current setup, but I wish to
move over to a different ISP as the one I am currently using is very
slow and is giving me constant problems. I am running RH 5.2 with diald
.066. I change all the nessescary settings as recommended by the new ISP but
it fails to connect. Both ISP's use PAP, so all I basically changed was the
info in pap-secrets and diald.conf file. and the connect script
Here is the output of my log when it tries to connect.
Oct 6 15:42:21 orion diald[347]: Running pppd (pid =
31674).
Oct 6 15:42:21 orion kernel: PPP: version 2.2.0 (dynamic
channel allocation)
Oct 6 15:42:21 orion kernel: PPP Dynamic
channel allocation code copyright 199$
Oct 6 15:42:21 orion kernel:
PPP line discipline registered.
Oct 6 15:42:21 orion kernel:
registered device ppp0
Oct 6 15:42:21 orion pppd[31674]: pppd 2.3.5
started by root, uid 0
Oct 6 15:42:21 orion pppd[31674]: Using
interface ppp0
Oct 6 15:42:21 orion pppd[31674]: Connect: ppp0
<--> /dev/ttyS0
Oct 6 15:42:51 orion pppd[31674]: LCP:
timeout sending Config-Requests
Oct 6 15:42:51 orion pppd[31674]:
Connection terminated.
Oct 6 15:42:51 orion pppd[31674]: Receive
serial link is not 8-bit clean:
Oct 6 15:42:51 orion pppd[31674]:
Problem: all had even parity
Oct 6 15:42:51 orion pppd[31674]:
Hangup
(SIGHUP)
Any Help would be appricaited.
Thanks
Matt
| 