Dear list-readers,
I am trying to install and run diald but I don't manage to get a connection.
Diald report that it "modprobe: can't locate module tap0".
after that it remains running but it does not respond to foreign IP
addresses.
(connection failed , network is unreachable). (sl0 is only available because
of diald )
I don't know how to solve this problem, Can someone give me a hint?
Is is because of a wrong make option?
Thank you in advance,
Ron Groen
The Netherlands
var/log/messages reports:
Oct 15 08:17:00 quad network: Bringing up interface lo succeeded
Oct 15 08:17:01 quad network: Bringing up interface eth0 succeeded
Oct 15 08:17:01 quad network: Bringing up interface ppp0 succeeded
Oct 15 08:17:01 quad network: Bringing up interface sl0 succeeded
...
Oct 15 09:31:10 quad modprobe: can't locate module tap0
Oct 15 09:31:10 quad modprobe: can't locate module tap1
Oct 15 09:31:10 quad modprobe: can't locate module tap2
Oct 15 09:31:10 quad modprobe: can't locate module tap3
Oct 15 09:31:11 quad modprobe: can't locate module tap4
Oct 15 09:31:11 quad modprobe: can't locate module tap5
Oct 15 09:31:11 quad modprobe: can't locate module tap6
Oct 15 09:31:11 quad modprobe: can't locate module tap7
Oct 15 09:31:12 quad modprobe: can't locate module tap8
Oct 15 09:31:12 quad modprobe: can't locate module tap9
Oct 15 09:31:12 quad modprobe: can't locate module tap10
Oct 15 09:31:12 quad modprobe: can't locate module tap11
Oct 15 09:31:13 quad modprobe: can't locate module tap12
Oct 15 09:31:13 quad modprobe: can't locate module tap13
Oct 15 09:31:13 quad modprobe: can't locate module tap14
Oct 15 09:31:13 quad modprobe: can't locate module tap15
Oct 15 09:31:14 quad kernel: CSLIP: code copyright 1989 Regents of the
University of California
Oct 15 09:31:14 quad kernel: SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR
(dynamic channels, max=256) (6 bit encapsulation enabled).
Oct 15 09:31:14 quad kernel: SLIP linefill/keepalive option.
Oct 15 09:31:14 quad diald[643]: start sl0: SIOCADDRT: No such device
My /etc/diald/diald.conf is during evaluation
mode ppp
debug 31
device /dev/ttyS3
connect /etc/diald/connect
speed 38400
modem
lock
crtscts
local 192.168.0.3
remote 192.168.0.99
dynamic
defaultroute
up
include /usr/lib/diald/standard.filter
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
