I have diald running configured to dial my ISP and dctrl working to
watch the progress.
It makes the ppp connection I see the IP address that I get from the ISP
but then it complains about sl0 not starting.
I have tried modprobe slip and that loads but I am not sure what I have
broken.
Dave Waller
/var/log/messages
Feb 2 20:24:35 router diald[2375]: FIFO: link up request
Feb 2 20:24:35 router diald[2375]: Calling site 208.142.107.130
Feb 2 20:24:36 router connect: Initializing Modem
Feb 2 20:24:37 router connect: Dialing system 3296556
Feb 2 20:24:56 router connect: Connected
Feb 2 20:24:56 router connect: Loggin in
Feb 2 20:24:57 router connect: Protocol started
Feb 2 20:24:57 router diald[2375]: Connected to site 208.142.107.130
Feb 2 20:24:57 router diald[2375]: Running pppd (pid = 2544).
Feb 2 20:24:57 router pppd[2544]: pppd 2.3.7 started by root, uid 0
Feb 2 20:24:57 router pppd[2544]: Using interface ppp0
Feb 2 20:24:57 router pppd[2544]: Connect: ppp0 <--> /dev/ttyS1
Feb 2 20:25:01 router modprobe: can't locate module ppp-compress-21
Feb 2 20:25:01 router modprobe: can't locate module ppp-compress-26
Feb 2 20:25:02 router modprobe: can't locate module ppp-compress-24
Feb 2 20:25:02 router pppd[2544]: local IP address 208.142.107.252
Feb 2 20:25:02 router pppd[2544]: remote IP address 208.142.107.130
Feb 2 20:25:03 router diald[2375]: New addresses: local
208.142.107.252, remote
208.142.107.130, broadcast 0.0.0.0
Feb 2 20:25:03 router diald[2375]: stop sl0: SIOCDELRT: No such process
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
