On Tuesday 19 November 2002 12:24, J�rgen Peitz wrote: > Am Dienstag, 19. November 2002 09:19 schrieb Nils Ohlmeier: > > I made and insmoded the driver, and compiled the [s|c|t]zap application. > > Copied the channels.conf-dvbt-berlin to ~/.tzap/channels.conf and the > > result from './tzap RTL' looks like this: > > > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > > tuning to 778000000 Hz > > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > > Hi, > channels.conf for tzap is probably not up to date. Frequenzy for RTL DVB-T > in Berlin is 658000000. This are the values from my vdr channels.conf. > > : DVB-T Berlin Germany > [...] > Update tzap channels.conf with this values and try to tune to different > channels. Sometimes it takes a while before they lock.
Hi, thanks for your help. But the using of tzap should only reproduce the error messages i get in the kernel logs (http://www.ohlmeier.de/TT-DVB-T.log). And also with the correct frequenzy and waiting for more then 15 seconds the output of tzap does not change. And if understood it correct i should at least get some values different from zero, allthough it may does not lock. From the logs i would say the driver is not loaded correct or even does not support my card. But i'm a newbie to this stuff and may be wrong, That's why i'm asking for help with my logs here. Greetings Nils -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
