Hi Holger, i opened the tuner and it contains a chip label SP5659. As a proof ;) some quick shots with my webcam are stored at http://www.ohlmeier.de/TT-DVB/
If a can do anything to get this runing, please let know. Thanks and greetings Nils On Wednesday 20 November 2002 13:28, Holger Waechtler wrote: > Hi Nils, > > please takle a look into your tuner module (the silver metal box) and > tell me the name of the little chip inside. Juergens driver should work > fine if there is a SP5659, but will fail if you find a SP5668. The > latter is not connected via i2c but a serial interface, it needs t obe > handled differently. > > Holger > > Nils Ohlmeier wrote: > > Hi, > > > > On Tuesday 19 November 2002 19:52, J�rgen Peitz wrote: > >>Am Dienstag, 19. November 2002 14:34 schrieb Holger Waechtler: > >>>Juri Haberland wrote: > >>>>Nils Ohlmeier wrote: > >>>>>From the logs i would say the driver is not loaded correct or even > >>>>> > >>>>>does not > >>>>>support my card. But i'm a newbie to this stuff and may be wrong, > >>>>>That's why > >>>>>i'm asking for help with my logs here. > >>>> > >>>>I think the driver is actually working and it seems that you have the > >>>>same revision as I have (1.2). You also seem to have copied the > >>>>Sc_main.mc file from the Windows driver to the appropiate directory. > >>>> > >>>>Please try to unload/load the driver one or two times and try to tune > >>>>with 'tzap ZDF'. > >>> > >>>please update your driver source before - yesterday I introduced a bug > >>>which might had caused your problems. should be fixed again. > >> > >>because of some changes in dvb_frontend.c the tdlb7 driver works better > >>with this patch. > >> > >>Holger, can you please add this also to CVS. > > > > i did made a 'cvs update' a few minutes ago and applied J�rgens patch. > > Then i insmoded the driver and tryed 'tzap ZDF'. No luck. > > But Juri is right with his advice to load and unload the driver a few > > times. This leads sometimes to the result that the tzap output changes > > from the all zero line to 'status 17' and 'FE_HAS_LOCK' at the end of the > > line. But nevertheless no picture. > > Maybe some facts about my system are helpfull: > > Gentoo Linux 1.4_rc1, kernel 2.4.19-gentoo-r9, gcc 3.2 > > Athlon XP 1900+, Asus A7V8X board with Via KT400 chipset, addtionaly to > > my TT DVB-T 1.2 card a Hauppauge WinTV card is installed and shares the > > interrupt with the TT (but i also tried it without the bttv driver > > loaded). > > > > I'm open for any hints. Should i try to remove the WinTV card for > > example? > > > > Thanks and greetings > > Nils -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
