Hi, On Tuesday 19 November 2002 19:52, J�rgen Peitz wrote: > Am Dienstag, 19. November 2002 14:34 schrieb Holger Waechtler: > > Juri Haberland wrote: > > > Nils Ohlmeier wrote: > > >>From the logs i would say the driver is not loaded correct or even > > >>does not > > >>support my card. But i'm a newbie to this stuff and may be wrong, > > >>That's why > > >>i'm asking for help with my logs here. > > > > > > I think the driver is actually working and it seems that you have the > > > same revision as I have (1.2). You also seem to have copied the > > > Sc_main.mc file from the Windows driver to the appropiate directory. > > > > > > Please try to unload/load the driver one or two times and try to tune > > > with 'tzap ZDF'. > > > > please update your driver source before - yesterday I introduced a bug > > which might had caused your problems. should be fixed again. > > because of some changes in dvb_frontend.c the tdlb7 driver works better > with this patch. > > Holger, can you please add this also to CVS.
i did made a 'cvs update' a few minutes ago and applied J�rgens patch. Then i insmoded the driver and tryed 'tzap ZDF'. No luck. But Juri is right with his advice to load and unload the driver a few times. This leads sometimes to the result that the tzap output changes from the all zero line to 'status 17' and 'FE_HAS_LOCK' at the end of the line. But nevertheless no picture. Maybe some facts about my system are helpfull: Gentoo Linux 1.4_rc1, kernel 2.4.19-gentoo-r9, gcc 3.2 Athlon XP 1900+, Asus A7V8X board with Via KT400 chipset, addtionaly to my TT DVB-T 1.2 card a Hauppauge WinTV card is installed and shares the interrupt with the TT (but i also tried it without the bttv driver loaded). I'm open for any hints. Should i try to remove the WinTV card for example? Thanks and greetings Nils -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
