Hello! Am Mittwoch, 20. November 2002 13:14 schrieb Nils Ohlmeier: > i did made a 'cvs update' a few minutes ago and applied J�rgens patch. > Then i insmoded the driver and tryed 'tzap ZDF'. No luck. > But Juri is right with his advice to load and unload the driver a few > times. This leads sometimes to the result that the tzap output changes from > the all zero line to 'status 17' and 'FE_HAS_LOCK' at the end of the line. > But nevertheless no picture. > Maybe some facts about my system are helpfull: > Gentoo Linux 1.4_rc1, kernel 2.4.19-gentoo-r9, gcc 3.2 > Athlon XP 1900+, Asus A7V8X board with Via KT400 chipset, addtionaly to my > TT DVB-T 1.2 card a Hauppauge WinTV card is installed and shares the > interrupt with the TT (but i also tried it without the bttv driver loaded). > > I'm open for any hints. Should i try to remove the WinTV card for example?
I think you have the same problems I had, when I started to tune my DVB-T board the first time. The solution in my case: I had a very bad reception with my indoor antenna at a specific location. Please start "tzap pro7", take your antenna and run around in your living room. After a while, you'll see some artefacts and if you're lucky, you'll see a perfect and clear picture. I had a conversation with Holger for one or two weeks and I'm still sorry for my annoyance, because at the end it was just a bad reception... Andi -- Web: http://www.flood-net.de/ Mail: [EMAIL PROTECTED] Phone: +49-(0)-30-680577-44 Linux SetTopBox! http://www.flood-net.de/flood/projects/liquid/ Windows sucks, Linux rules :-) http://srom.zgp.org/ Who needs DivX? telnet blinkenlights.nl -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
