Hi, On Mon, 2003-03-10 at 12:16, Erik Scholten wrote: > <--snip--> > i2c-core.o: driver DVB I2C bridge registered. > ves1820.c: unknown PLL, please report to <[EMAIL PROTECTED]>!! > VES1820: pwm=ff > DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)... > <--snip-->
The PLL is connected to the frontprocessor through a 3-wire bus. the ves1820 can not access it directly. you have to register "frontend before ioctls". See dbox2_fp_napi.c for details. > The PLL that's in the STB is a sp5659, so it should be supported by the > driver. It is - somehow. (By dbox2_fp_napi.c, not ves1820.c in this case again) > The result of the driver not detecting the tuner correctly is that it > can't communicate with it through the i2c bus and it seems to me that it > doesn't set the correct register values in the tuner. See above. > But now I'm really stuck, after trying almost every patch I encountered > on the list it still won't lock, not after letting it tune for an hour. > > Any input is most appreciated, > > Erik Scholten > > Btw. I'am using the Linux DVB driver release 1.0.0-pre2 cvs -d:pserver:[EMAIL PROTECTED]:/cvsroot/tuxbox -z3 co . This CVS contains a powerpc build environment, drivers and applications for the dbox2. See www.saftware.de -> INSTALL.en for installation instructions. If you make bugfixes, then please forward them to me. If you want to join development, you might want to visit us in ircnet channel #dbox2dev. See http://www.ircnet.com/index.php?&p=5&cur=nl for a list of local servers. Regards, Andreas -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
