How do I identify what tuner type I physically have? Here is the output the debug=1
#dmesg Linux video capture interface: v1.00 bttv: driver version 0.9.12 loaded bttv: snapshot date 2004-01-21 bttv: using 4 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 02:0b.0, irq: 23, latency: 64, mmio: 0xfbefc000 bttv0: detected: Nebula Electronics DigiTV [card=104], PCI subsystem ID is 0071:0101 bttv0: using: Nebula Electronics DigiTV [card=104,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00ff37cb [init] bttv0: using tuner=-1 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok bttv: Bt8xx card found (1). bttv1: Bt878 (rev 17) at 02:0a.0, irq: 22, latency: 64, mmio: 0xfbefe000 bttv1: subsystem: 1461:0761 (UNKNOWN) please mail id, board name and the correct card= insmod option to [EMAIL PROTECTED] bttv1: using: *** UNKNOWN/GENERIC *** [card=0,autodetected] bttv1: gpio: en=00000000, out=00000000 in=009c004d [init] bttv1: using tuner=-1 bttv1: i2c: checking for MSP34xx @ 0x80... not found bttv1: i2c: checking for TDA9875 @ 0xb0... not found bttv1: i2c: checking for TDA7432 @ 0x8a... not found bttv1: registered device video1 bttv1: registered device vbi1 bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). bt878(0): Bt878 (rev 17) at 02:0b.1, irq: 23, latency: 64, memory: 0xfbefd000 bt878: Bt878 AUDIO function found (1). bt878(1): Bt878 (rev 17) at 02:0a.1, irq: 22, latency: 64, memory: 0xfbeff000 DVB: registering new adapter (Neb). DVB: registering new adapter (Ave). nxt6000: init nxt6000: attach nxt6000: detected TI ALP510 tuner at 0xC0 nxt6000: attached at 0:0 DVB: registering frontend 0:0 (NxtWave NXT6000)... nxt6000: nxt6000_read error (.addr = 0x18, reg: 0x73, ret: -5) nxt6000: nxt6000_read error (.addr = 0x24, reg: 0x73, ret: -5) nxt6000: nxt6000_read error (.addr = 0x28, reg: 0x73, ret: -5) nxt6000: attach nxt6000: nxt6000_read error (.addr = 0x14, reg: 0x73, ret: -5) nxt6000: nxt6000_read error (.addr = 0x18, reg: 0x73, ret: -5) nxt6000: nxt6000_read error (.addr = 0x24, reg: 0x73, ret: -5) nxt6000: nxt6000_read error (.addr = 0x28, reg: 0x73, ret: -5) Robert -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Holger Waechtler Sent: Tuesday, 27 January 2004 1:07 AM To: [EMAIL PROTECTED] Subject: [linux-dvb] Re: Nebula DigiTV and nxt6000 problems Robert Cook wrote: > Look like the driver is loading and registering the frontend but no > joy using ztap. > > Robert > > #dmesg > i2c-core.o: i2c core module version 2.8.1 (20031005) > Linux video capture interface: v1.00 > bttv: driver version 0.9.12 loaded > bttv: snapshot date 2004-01-21 > bttv: using 4 buffers with 2080k (520 pages) each for capture > bttv: Bt8xx card found (0). > bttv0: Bt878 (rev 17) at 02:0b.0, irq: 23, latency: 64, mmio: > 0xfbefc000 > bttv0: detected: Nebula Electronics DigiTV [card=104], PCI subsystem ID > is 0071:0101 > bttv0: using: Nebula Electronics DigiTV [card=104,insmod option] > bttv0: gpio: en=00000000, out=00000000 in=00ff48cb [init] > bttv0: using tuner=-1 > bttv0: registered device video0 > bttv0: registered device vbi0 > bttv0: PLL: 28636363 => 35468950 .. ok > bttv: Bt8xx card found (1). > bttv1: Bt878 (rev 17) at 02:0a.0, irq: 22, latency: 64, mmio: 0xfbefe000 > bttv1: subsystem: 1461:0761 (UNKNOWN) > please mail id, board name and the correct card= insmod option to > [EMAIL PROTECTED] > bttv1: using: *** UNKNOWN/GENERIC *** [card=0,autodetected] > bttv1: gpio: en=00000000, out=00000000 in=009c004d [init] > bttv1: using tuner=-1 > bttv1: i2c: checking for MSP34xx @ 0x80... not found > bttv1: i2c: checking for TDA9875 @ 0xb0... not found > bttv1: i2c: checking for TDA7432 @ 0x8a... not found > bttv1: registered device video1 > bttv1: registered device vbi1 > bt878: AUDIO driver version 0.0.0 loaded > bt878: Bt878 AUDIO function found (0). > bt878(0): Bt878 (rev 17) at 02:0b.1, irq: 23, latency: 64, memory: > 0xfbefd000 > bt878: Bt878 AUDIO function found (1). > bt878(1): Bt878 (rev 17) at 02:0a.1, irq: 22, latency: 64, memory: > 0xfbeff000 > DVB: registering new adapter (Neb). > DVB: registering new adapter (Ave). > DVB: registering frontend 0:0 (NxtWave NXT6000)... Can you please load the nxt6000.o module with parameter debug=1? Then you get a message which should tell you what tunertype is used. Please check that this is the right one. Holger -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject. -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
