> echo 1 > /proc/sys/net/ipv4/conf/dvb0_0/forwarding
wasnt doing this. but have tried this and still not working. Is there
anyway i can trace wats going wrong????
Babar
>
>
> Il gio, 2004-04-29 alle 07:05, babar haq ha scritto:
> > Hi
> > I am desperately trying to get my sky star 2(B2C2) card to work on linux kernel
> > 2.6.5 with open sky service. Apparently everything is working fine.
> > First, I load the B2C2 module. Then we load the front end module which is detected
> > to be stv0299 . Then we use dvbtune to lock the frequency and create the dvb0_0
> > interface.The locking displays all the parameters to be fine e.g FE_LOCK.
> > Lastly, Ifconfig is used to set a dummy ip and the mac address(given to opensky by
> > us) of the dvb card.
> > After that we connect to the dial up and login to open sky services using lynx
> > http://sdr.eutelsat.com. All the information displayed is correct i.e the ip
> > address of our dial up ,the mac address of dvb card and the pid.
> > Then we set http_proxy variable to the opensky proxy to start recieving data from
> > satellite. We do not get any data from the dish i.e 0 bytes.
> > Can some one please guide us. Thanx in advance.
> >
> > Regards,
> > Babar Haq
> > --
> > ___________________________________________________________
> > Sign-up for Ads Free at Mail.com
> > http://promo.mail.com/adsfreejump.htm
> --
> Vincenzo Di Massa <[EMAIL PROTECTED]>
>
>
>
> --
> Info:
> To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
> subject.
>
--
___________________________________________________________
Sign-up for Ads Free at Mail.com
http://promo.mail.com/adsfreejump.htm
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
