Hi,
I noticed using tcpdunp on dvb0_0 confuses the dvb driver. 
Avoid using tcpdump (If you use it you stop receiving bytes).

P.S. You say you are using dvbtune. I use szap to tune and dvbnet to
bring up dvb0_0. 
I never used dvbtune, but I think you should use dvbnet.

Il ven, 2004-04-30 alle 14:30, babar haq ha scritto:
> >         echo 1 > /proc/sys/net/ipv4/conf/dvb0_0/forwarding
>               wasnt doing this. but have tried this and still not working. Is there 
> anyway i can trace wats going wrong????
> Babar
> 
> 
> 
> 
> > 
> > 
> > Il gio, 2004-04-29 alle 07:05, babar haq ha scritto:
> > > Hi
> > > I am desperately trying to get my sky star 2(B2C2) card to work on linux kernel 
> > > 2.6.5 with open sky service. Apparently everything is working fine.
> > > First, I load the B2C2 module. Then we load the front end module which is 
> > > detected to be stv0299 . Then we use dvbtune to lock the frequency and create 
> > > the dvb0_0 interface.The locking displays all the parameters to be fine e.g 
> > > FE_LOCK.
> > > Lastly, Ifconfig is used to set a dummy ip and the mac address(given to opensky 
> > > by us) of the dvb card.
> > > After that we connect to the dial up and login to open sky services using lynx 
> > > http://sdr.eutelsat.com. All the information displayed is correct i.e the ip 
> > > address of our dial up ,the mac address of dvb card and the pid.
> > > Then we set http_proxy variable to the opensky proxy to start recieving data 
> > > from satellite. We do not get any data from the dish i.e 0 bytes.
> > > Can some one please guide us. Thanx in advance.
> > > 
> > > Regards,
> > > Babar Haq
> > > -- 
> > > ___________________________________________________________
> > > Sign-up for Ads Free at Mail.com
> > > http://promo.mail.com/adsfreejump.htm
> > -- 
> > Vincenzo Di Massa <[EMAIL PROTECTED]>
> > 
> > 
> > 
> > -- 
> > Info:
> > To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as 
> > subject.
> > 
> 
> -- 
> ___________________________________________________________
> Sign-up for Ads Free at Mail.com
> http://promo.mail.com/adsfreejump.htm
-- 
Vincenzo Di Massa <[EMAIL PROTECTED]>



-- 
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as 
subject.

Reply via email to