Hi Are you using skystar2 with open sky. If yes, can you please tell us the distribution, kernel version and the steps u r follwoing. Will be of great help. Thanx in advance. Babar Haq
> Hi, > I noticed using tcpdunp on dvb0_0 confuses the dvb driver. > Avoid using tcpdump (If you use it you stop receiving bytes). > > P.S. You say you are using dvbtune. I use szap to tune and dvbnet to > bring up dvb0_0. > I never used dvbtune, but I think you should use dvbnet. > > Il ven, 2004-04-30 alle 14:30, babar haq ha scritto: > > > echo 1 > /proc/sys/net/ipv4/conf/dvb0_0/forwarding > > wasnt doing this. but have tried this and still not working. Is > > there anyway i can trace wats going wrong???? > > Babar > > > > > > > > > > > > > > > > > Il gio, 2004-04-29 alle 07:05, babar haq ha scritto: > > > > Hi > > > > I am desperately trying to get my sky star 2(B2C2) card to work on linux > > > > kernel 2.6.5 with open sky service. Apparently everything is working fine. > > > > First, I load the B2C2 module. Then we load the front end module which is > > > > detected to be stv0299 . Then we use dvbtune to lock the frequency and create > > > > the dvb0_0 interface.The locking displays all the parameters to be fine e.g > > > > FE_LOCK. > > > > Lastly, Ifconfig is used to set a dummy ip and the mac address(given to > > > > opensky by us) of the dvb card. > > > > After that we connect to the dial up and login to open sky services using lynx > > > > http://sdr.eutelsat.com. All the information displayed is correct i.e the ip > > > > address of our dial up ,the mac address of dvb card and the pid. > > > > Then we set http_proxy variable to the opensky proxy to start recieving data > > > > from satellite. We do not get any data from the dish i.e 0 bytes. > > > > Can some one please guide us. Thanx in advance. > > > > > > > > Regards, > > > > Babar Haq > > > > -- > > > > ___________________________________________________________ > > > > Sign-up for Ads Free at Mail.com > > > > http://promo.mail.com/adsfreejump.htm > > > -- > > > Vincenzo Di Massa <[EMAIL PROTECTED]> > > > > > > > > > > > > -- > > > Info: > > > To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as > > > subject. > > > > > > > -- > > ___________________________________________________________ > > Sign-up for Ads Free at Mail.com > > http://promo.mail.com/adsfreejump.htm > -- > Vincenzo Di Massa <[EMAIL PROTECTED]> > > > > -- > Info: > To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as > subject. > -- ___________________________________________________________ Sign-up for Ads Free at Mail.com http://promo.mail.com/adsfreejump.htm -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
