More information... I attach a dmesg of tuner-xc2028 loaded in debug mode
while doing a scan ( scan es-Collserola|tee channels.conf ). I don't see any
problem, but it doesn't work.
Albert
2008/2/16, Albert Comerma <[EMAIL PROTECTED]>:
>
> For what I understand, changing the Firmware 64 to 60000200 changes the if
> frequency to 5.2MHz. So this modification on the firmware should make the
> card work. What it's more strange for me is that when trying to scan no
> signal or SNR is reported, so it seems like xc3028 firmware is not working
> properly. Perhaps could be a wrong BASE or DTV firmware loaded?
>
> Albert
>
> 2008/2/16, Albert Comerma <[EMAIL PROTECTED]>:
> >
> > So, If it's not a problem, any of you could send me the current xc3028
> > firmware you are using, because mine does not seem to work... Thanks.
> >
> > Albert
> >
> > 2008/2/15, Patrick Boettcher <[EMAIL PROTECTED]>:
> > >
> > > Aah now I remember that issue, in fact it is no issue. I was seeing
> > > that
> > > problem when send the sleep command or any other firmware command
> > > without
> > > having a firmware running. In was, so far, no problem.
> > >
> > > Patrick.
> > >
> > >
> > >
> > > On Fri, 15 Feb 2008, Holger Dehnhardt wrote:
> > >
> > > > Hi Albert, Hi Mauro,
> > > >
> > > > I have successfulli patched and compiled the driver. Im using the
> > > terratec
> > > > cinergy device and it works fine.
> > > >
> > > >>> [ 2251.856000] xc2028 4-0061: Error on line 1063: -5
> > > >
> > > > This error message looked very familar to me, so i searched my log
> > > and guess
> > > > what I found:
> > > >
> > > > Feb 15 20:42:18 musik kernel: xc2028 3-0061: xc2028_sleep called
> > > > Feb 15 20:42:18 musik kernel: xc2028 3-0061: xc2028_sleep called
> > > > Feb 15 20:42:18 musik kernel: xc2028 3-0061: Error on line 1064: -5
> > > > Feb 15 20:42:18 musik kernel: DiB7000P: setting output mode for
> > > demod df75e800
> > > > to 0
> > > > Feb 15 20:42:18 musik kernel: DiB7000P: setting output mode for
> > > demod df75e800
> > > > to 0
> > > >
> > > > It identifies the marked line (just to be sure because of the
> > > differen line
> > > > numbers)
> > > >
> > > > if (priv->firm_version < 0x0202)
> > > > -> rc = send_seq(priv, {0x00, 0x08, 0x00, 0x00});
> > > > else
> > > > rc = send_seq(priv, {0x80, 0x08, 0x00, 0x00});
> > > >
> > > >> The above error is really weird. It seems to be related to
> > > something that
> > > >> happened before xc2028, since firmware load didn't start on that
> > > point of
> > > >> the code.
> > > >
> > > > The error really is weird, but it does not seem to cause the
> > > troubles - my
> > > > card works despite the error!
> > > >
> > > >>
> > > >>> [ 2289.284000] xc2028 4-0061: Device is Xceive 3028 version 1.0,
> > > firmware
> > > >>> version 2.7
> > > >>
> > > >> This message means that xc3028 firmware were successfully loaded
> > > and it is
> > > >> running ok.
> > > >
> > > > This and the following messages look similar...
> > > >
> > > > Holger
> > > >
> > > > _______________________________________________
> > > > linux-dvb mailing list
> > > > linux-dvb@linuxtv.org
> > > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> > > >
> > >
> > > _______________________________________________
> > > linux-dvb mailing list
> > > linux-dvb@linuxtv.org
> > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> > >
> >
> >
>
[ 2197.708000] usb 6-1: new high speed USB device using ehci_hcd and address 4
[ 2197.840000] usb 6-1: configuration #1 chosen from 1 choice
[ 2197.840000] dvb-usb: found a 'Pinnacle Expresscard 320cx' in cold state,
will try to load a firmware
[ 2197.844000] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
[ 2198.048000] dib0700: firmware started successfully.
[ 2198.552000] dvb-usb: found a 'Pinnacle Expresscard 320cx' in warm state.
[ 2198.552000] dvb-usb: will pass the complete MPEG2 transport stream to the
software demuxer.
[ 2198.552000] DVB: registering new adapter (Pinnacle Expresscard 320cx)
[ 2198.920000] DVB: registering frontend 0 (DiBcom 7000PC)...
[ 2198.920000] xc2028: Xcv2028/3028 init called!
[ 2198.920000] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner
[ 2198.920000] xc2028 4-0061: xc2028_set_config called
[ 2198.920000] input: IR-receiver inside an USB DVB receiver as
/class/input/input11
[ 2198.920000] dvb-usb: schedule remote query interval to 150 msecs.
[ 2198.920000] dvb-usb: Pinnacle Expresscard 320cx successfully initialized and
connected.
[ 2223.936000] xc2028 4-0061: xc2028_set_params called
[ 2223.936000] xc2028 4-0061: generic_set_freq called
[ 2223.936000] xc2028 4-0061: should set frequency 514000 kHz
[ 2223.936000] xc2028 4-0061: check_firmware called
[ 2223.936000] xc2028 4-0061: load_all_firmwares called
[ 2223.936000] xc2028 4-0061: Reading firmware xc3028-v27.fw
[ 2223.940000] xc2028 4-0061: Loading 80 firmware images from xc3028-v27.fw,
type: xc2028 firmware, ver 2.7
[ 2223.940000] xc2028 4-0061: Reading firmware type BASE F8MHZ (3), id 0,
size=8718.
[ 2223.940000] xc2028 4-0061: Reading firmware type BASE F8MHZ MTS (7), id 0,
size=8712.
[ 2223.940000] xc2028 4-0061: Reading firmware type BASE FM (401), id 0,
size=8562.
[ 2223.940000] xc2028 4-0061: Reading firmware type BASE FM INPUT1 (c01), id 0,
size=8576.
[ 2223.940000] xc2028 4-0061: Reading firmware type BASE (1), id 0, size=8706.
[ 2223.940000] xc2028 4-0061: Reading firmware type BASE MTS (5), id 0,
size=8682.
[ 2223.940000] xc2028 4-0061: Reading firmware type (0), id 100000007, size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type MTS (4), id 100000007,
size=169.
[ 2223.940000] xc2028 4-0061: Reading firmware type (0), id 200000007, size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type MTS (4), id 200000007,
size=169.
[ 2223.940000] xc2028 4-0061: Reading firmware type (0), id 400000007, size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type MTS (4), id 400000007,
size=169.
[ 2223.940000] xc2028 4-0061: Reading firmware type (0), id 800000007, size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type MTS (4), id 800000007,
size=169.
[ 2223.940000] xc2028 4-0061: Reading firmware type (0), id 3000000e0, size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type MTS (4), id 3000000e0,
size=169.
[ 2223.940000] xc2028 4-0061: Reading firmware type (0), id c000000e0, size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type MTS (4), id c000000e0,
size=169.
[ 2223.940000] xc2028 4-0061: Reading firmware type (0), id 200000, size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type MTS (4), id 200000,
size=169.
[ 2223.940000] xc2028 4-0061: Reading firmware type (0), id 4000000, size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type MTS (4), id 4000000,
size=169.
[ 2223.940000] xc2028 4-0061: Reading firmware type D2633 DTV6 ATSC (10030), id
0, size=149.
[ 2223.940000] xc2028 4-0061: Reading firmware type D2620 DTV6 QAM (68), id 0,
size=149.
[ 2223.940000] xc2028 4-0061: Reading firmware type D2633 DTV6 QAM (70), id 0,
size=149.
[ 2223.940000] xc2028 4-0061: Reading firmware type D2620 DTV7 (88), id 0,
size=149.
[ 2223.940000] xc2028 4-0061: Reading firmware type D2633 DTV7 (90), id 0,
size=149.
[ 2223.940000] xc2028 4-0061: Reading firmware type D2620 DTV78 (108), id 0,
size=149.
[ 2223.940000] xc2028 4-0061: Reading firmware type D2633 DTV78 (110), id 0,
size=149.
[ 2223.940000] xc2028 4-0061: Reading firmware type D2620 DTV8 (208), id 0,
size=149.
[ 2223.940000] xc2028 4-0061: Reading firmware type D2633 DTV8 (210), id 0,
size=149.
[ 2223.940000] xc2028 4-0061: Reading firmware type FM (400), id 0, size=135.
[ 2223.940000] xc2028 4-0061: Reading firmware type (0), id 10, size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type MTS (4), id 10, size=169.
[ 2223.940000] xc2028 4-0061: Reading firmware type (0), id 1000400000,
size=169.
[ 2223.940000] xc2028 4-0061: Reading firmware type (0), id c00400000, size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type (0), id 800000, size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type (0), id 8000, size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type LCD (1000), id 8000,
size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type LCD NOGD (3000), id 8000,
size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type MTS (4), id 8000, size=169.
[ 2223.940000] xc2028 4-0061: Reading firmware type (0), id b700, size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type LCD (1000), id b700,
size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type LCD NOGD (3000), id b700,
size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type (0), id 2000, size=161.
[ 2223.940000] xc2028 4-0061: Reading firmware type MTS (4), id b700, size=169.
[ 2223.940000] xc2028 4-0061: Reading firmware type MTS LCD (1004), id b700,
size=169.
[ 2223.940000] xc2028 4-0061: Reading firmware type MTS LCD NOGD (3004), id
b700, size=169.
[ 2223.940000] xc2028 4-0061: Reading firmware type SCODE HAS_IF_3280
(60000000), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type SCODE HAS_IF_3300
(60000000), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type SCODE HAS_IF_3440
(60000000), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type SCODE HAS_IF_3460
(60000000), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type DTV6 ATSC OREN36 SCODE
HAS_IF_3800 (60210020), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type SCODE HAS_IF_4000
(60000000), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type DTV6 ATSC TOYOTA388 SCODE
HAS_IF_4080 (60410020), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type SCODE HAS_IF_4200
(60000000), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type MONO SCODE HAS_IF_4320
(60008000), id 8000, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type SCODE HAS_IF_4450
(60000000), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type SCODE HAS_IF_4500
(60000000), id 2000, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type LCD NOGD IF SCODE
HAS_IF_4600 (60023000), id 8000, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type DTV78 ZARLINK456 SCODE
HAS_IF_4760 (62000100), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type SCODE HAS_IF_4940
(60000000), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type DTV7 ZARLINK456 SCODE
HAS_IF_5260 (62000080), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type MONO SCODE HAS_IF_5320
(60008000), id 800000007, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type DTV8 SCODE HAS_IF_5400
(60000200), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type DTV6 ATSC OREN538 SCODE
HAS_IF_5580 (60110020), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type SCODE HAS_IF_5640
(60000000), id 200000007, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type SCODE HAS_IF_5740
(60000000), id 800000007, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type DTV7 DIBCOM52 SCODE
HAS_IF_5900 (61000080), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type MONO SCODE HAS_IF_6000
(60008000), id 10, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type DTV6 QAM F6MHZ SCODE
HAS_IF_6200 (68000060), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type SCODE HAS_IF_6240
(60000000), id 10, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type MONO SCODE HAS_IF_6320
(60008000), id 200000, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type SCODE HAS_IF_6340
(60000000), id 200000, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type MONO SCODE HAS_IF_6500
(60008000), id 4000000, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type DTV6 ATSC ATI638 SCODE
HAS_IF_6580 (60090020), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type SCODE HAS_IF_6600
(60000000), id 3000000e0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type MONO SCODE HAS_IF_6680
(60008000), id 3000000e0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type DTV6 ATSC TOYOTA794 SCODE
HAS_IF_8140 (60810020), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Reading firmware type SCODE HAS_IF_8200
(60000000), id 0, size=192.
[ 2223.940000] xc2028 4-0061: Firmware files loaded.
[ 2223.940000] xc2028 4-0061: checking firmware, user requested type=F8MHZ
D2620 DTV8 (20a), id 0000000000000000, scode_tbl (0), scode_nr 0
[ 2223.940000] dib0700: stk7700ph_xc3028_callback: XC2028_TUNER_RESET 0
[ 2223.940000]
[ 2223.968000] xc2028 4-0061: load_firmware called
[ 2223.968000] xc2028 4-0061: seek_firmware called, want type=BASE F8MHZ D2620
DTV8 (20b), id 0000000000000000.
[ 2223.968000] xc2028 4-0061: Found firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 2223.968000] xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 2223.968000] dib0700: stk7700ph_xc3028_callback: XC2028_TUNER_RESET 0
[ 2223.968000]
[ 2230.492000] xc2028 4-0061: Load init1 firmware, if exists
[ 2230.492000] xc2028 4-0061: load_firmware called
[ 2230.492000] xc2028 4-0061: seek_firmware called, want type=BASE INIT1 F8MHZ
D2620 DTV8 (420b), id 0000000000000000.
[ 2230.492000] xc2028 4-0061: Can't find firmware for type=BASE INIT1 F8MHZ
(4003), id 0000000000000000.
[ 2230.492000] xc2028 4-0061: load_firmware called
[ 2230.492000] xc2028 4-0061: seek_firmware called, want type=BASE INIT1 D2620
DTV8 (4209), id 0000000000000000.
[ 2230.492000] xc2028 4-0061: Can't find firmware for type=BASE INIT1 (4001),
id 0000000000000000.
[ 2230.492000] xc2028 4-0061: load_firmware called
[ 2230.492000] xc2028 4-0061: seek_firmware called, want type=F8MHZ D2620 DTV8
(20a), id 0000000000000000.
[ 2230.492000] xc2028 4-0061: Found firmware for type=D2620 DTV8 (208), id
0000000000000000.
[ 2230.492000] xc2028 4-0061: Loading firmware for type=D2620 DTV8 (208), id
0000000000000000.
[ 2230.604000] xc2028 4-0061: Trying to load scode 0
[ 2230.604000] xc2028 4-0061: load_scode called
[ 2230.604000] xc2028 4-0061: seek_firmware called, want type=F8MHZ D2620 DTV8
SCODE (2000020a), id 0000000000000000.
[ 2230.604000] xc2028 4-0061: Found firmware for type=DTV8 SCODE (20000200), id
0000000000000000.
[ 2230.604000] xc2028 4-0061: Loading SCODE for type=DTV8 SCODE HAS_IF_5400
(60000200), id 0000000000000000.
[ 2230.652000] xc2028 4-0061: xc2028_get_reg 0004 called
[ 2230.656000] xc2028 4-0061: xc2028_get_reg 0008 called
[ 2230.660000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware
version 2.7
[ 2230.684000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 2230.684000]
[ 2230.808000] xc2028 4-0061: divisor= 00 00 7f d0 (freq=514.000)
[ 2232.196000] xc2028 4-0061: xc2028_set_params called
[ 2232.196000] xc2028 4-0061: generic_set_freq called
[ 2232.196000] xc2028 4-0061: should set frequency 514000 kHz
[ 2232.196000] xc2028 4-0061: check_firmware called
[ 2232.196000] xc2028 4-0061: checking firmware, user requested type=F8MHZ
D2620 DTV8 (20a), id 0000000000000000, scode_tbl (0), scode_nr 0
[ 2232.196000] xc2028 4-0061: BASE firmware not changed.
[ 2232.196000] xc2028 4-0061: Std-specific firmware already loaded.
[ 2232.196000] xc2028 4-0061: SCODE firmware already loaded.
[ 2232.196000] xc2028 4-0061: xc2028_get_reg 0004 called
[ 2232.204000] xc2028 4-0061: xc2028_get_reg 0008 called
[ 2232.208000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware
version 2.7
[ 2232.228000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 2232.228000]
[ 2232.352000] xc2028 4-0061: divisor= 00 00 7f d0 (freq=514.000)
[ 2233.536000] xc2028 4-0061: xc2028_set_params called
[ 2233.536000] xc2028 4-0061: generic_set_freq called
[ 2233.536000] xc2028 4-0061: should set frequency 514000 kHz
[ 2233.536000] xc2028 4-0061: check_firmware called
[ 2233.536000] xc2028 4-0061: checking firmware, user requested type=F8MHZ
D2620 DTV8 (20a), id 0000000000000000, scode_tbl (0), scode_nr 0
[ 2233.536000] xc2028 4-0061: BASE firmware not changed.
[ 2233.536000] xc2028 4-0061: Std-specific firmware already loaded.
[ 2233.536000] xc2028 4-0061: SCODE firmware already loaded.
[ 2233.536000] xc2028 4-0061: xc2028_get_reg 0004 called
[ 2233.544000] xc2028 4-0061: xc2028_get_reg 0008 called
[ 2233.548000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware
version 2.7
....
[ 2273.716000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 2273.716000]
[ 2273.840000] xc2028 4-0061: divisor= 00 00 d5 d0 (freq=858.000)
[ 2275.212000] xc2028 4-0061: xc2028_set_params called
[ 2275.212000] xc2028 4-0061: generic_set_freq called
[ 2275.212000] xc2028 4-0061: should set frequency 858000 kHz
[ 2275.212000] xc2028 4-0061: check_firmware called
[ 2275.212000] xc2028 4-0061: checking firmware, user requested type=F8MHZ
D2620 DTV8 (20a), id 0000000000000000, scode_tbl (0), scode_nr 0
[ 2275.212000] xc2028 4-0061: BASE firmware not changed.
[ 2275.212000] xc2028 4-0061: Std-specific firmware already loaded.
[ 2275.212000] xc2028 4-0061: SCODE firmware already loaded.
[ 2275.212000] xc2028 4-0061: xc2028_get_reg 0004 called
[ 2275.220000] xc2028 4-0061: xc2028_get_reg 0008 called
[ 2275.224000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware
version 2.7
[ 2275.244000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 2275.244000]
[ 2275.368000] xc2028 4-0061: divisor= 00 00 d5 d0 (freq=858.000)
[ 2276.732000] xc2028 4-0061: xc2028_sleep called
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
