Hi, Thanks for response. I changed the udpport and heartbeat still trys to start on 694. I am using CentOS, does the port number have to be in any other place apart from ha.cf?
Thanks heartbeat[1108]: 2009/03/31_22:44:46 info: Configuration validated. Starting heartbeat 2.1.3 heartbeat[1109]: 2009/03/31_22:44:46 info: heartbeat: version 2.1.3 heartbeat[1109]: 2009/03/31_22:44:46 info: Heartbeat generation: 1238347641 heartbeat[1109]: 2009/03/31_22:44:46 info: glib: UDP Broadcast heartbeat started on port 694 (694) interface eth0 heartbeat[1109]: 2009/03/31_22:44:46 info: glib: UDP Broadcast heartbeat closed on port 694 interface eth0 - Status: 1 heartbeat[1109]: 2009/03/31_22:44:46 info: G_main_add_TriggerHandler: Added signal manual handler heartbeat[1109]: 2009/03/31_22:44:46 info: G_main_add_TriggerHandler: Added signal manual handler heartbeat[1109]: 2009/03/31_22:44:46 info: G_main_add_SignalHandler: Added signal handler for signal 17 heartbeat[1109]: 2009/03/31_22:44:46 info: Local status now set to: 'up' On Tue, Mar 31, 2009 at 4:41 PM, Arun G <[email protected]> wrote: > Try assigning different udp port for broadcast in both the clusters. > > Default port used is #udpport 694 > > Regards, > Arun. > >> From: Devraj Mukherjee <[email protected]> > >> Hi all, >> >> I am new to Hearbeat so please be kind :) >> >> I have successfully configure two machines to use heartbeat to cluster >> httpd. The two nodes are called etk-1 and etk-2. I am trying to >> configure another two machines to act as a separate cluster (on the >> same IP subnet). These two nodes are called radu-1 and radu-2. >> >> Obviously being a broadcast protocol radu-1 and radu-2 get these >> messages from etk-1 and I can't seem to get radu-1 and radu-2 to >> cluster (mostly probably because they are not getting the messages >> from the right nodes). >> >> Is it possible to have two sets of clusters in the one IP subnet? >> >> If yes what do I have to change so these clusters don't send messages >> to the wrong nodes. >> >> heartbeat[3745]: 2009/03/30_04:48:02 ERROR: process_status_message: >> bad node [etk-1] in message >> heartbeat[3745]: 2009/03/30_04:48:02 ERROR: MSG: Dumping message with 10 >> fields >> heartbeat[3745]: 2009/03/30_04:48:02 ERROR: MSG[0] : [t=NS_ackmsg] >> heartbeat[3745]: 2009/03/30_04:48:02 ERROR: MSG[1] : [dest= etk-2] >> heartbeat[3745]: 2009/03/30_04:48:02 ERROR: MSG[2] : [ackseq=1a9601] >> heartbeat[3745]: 2009/03/30_04:48:02 ERROR: MSG[3] : >> [(1)destuuid=0xdf38de8(37 28)] >> heartbeat[3745]: 2009/03/30_04:48:02 ERROR: MSG[4] : [src= etk-1] >> heartbeat[3745]: 2009/03/30_04:48:02 ERROR: MSG[5] : >> [(1)srcuuid=0xdf39248(36 27)] >> heartbeat[3745]: 2009/03/30_04:48:02 ERROR: MSG[6] : [hg=499a2a65] >> heartbeat[3745]: 2009/03/30_04:48:02 ERROR: MSG[7] : [ts=49cfb452] >> heartbeat[3745]: 2009/03/30_04:48:02 ERROR: MSG[8] : [ttl=3] >> >> >> -- >> "The secret impresses no-one, the trick you use it for is everything" >> - Alfred Borden (The Prestiege) >> > _______________________________________________ > Linux-HA mailing list > [email protected] > http://lists.linux-ha.org/mailman/listinfo/linux-ha > See also: http://linux-ha.org/ReportingProblems > -- "The secret impresses no-one, the trick you use it for is everything" - Alfred Borden (The Prestiege) _______________________________________________ Linux-HA mailing list [email protected] http://lists.linux-ha.org/mailman/listinfo/linux-ha See also: http://linux-ha.org/ReportingProblems
