To anyone really, a helpful hint on overclocking and RH 5.2.
I ran into a bus error problem under X which would cause it to crap out
with a Signal 11. I found the problem after a month, I had the MB (a VX
chipset)
set for 75 Mhz bus speed instead of the normal 66 Mhz. Now that it
is setup correctly, RH 5.2 simply flies.
73
Patrick Dunn
KC2BQZ
"Duvall, Michael J." wrote:
> If it worked in one machine, moving the hard drive and cards to another
> machine should not be a real problem. PCI plug and play cards can cause
> problems when they don't configure themselves correctly but I suspect
> that you are not moving PCI cards.
>
> If you run Xwindows make sure configure it for the new graphics card.
>
> Mike Duvall
> ac4zq
--
--------------------------------------------------------------
Patrick Dunn, Web Developer - [EMAIL PROTECTED]
SANY Internet Publishing Services, Inc.
315-696-6550/http://www.sanyips.com
