I have more or less the same setup. I just checked and they ARE both
in /usr/sbin.
Note that I was unable to compile the AX25 utils until I got the
ax25-utils-2.1.42a (glibc/libc6) .tgz source file from
sun01.idf.uni-heidelberg.de. It compiled OK and it also correctly
installed some header files, which are apparently not in the
.rpm file I got from from a RedHat mirror. (If they are, then where
did it put them ??)
Obviously the .rpm file from SuSE may do the job for you - I have not
tried it.
John G3JAG
On 28-Apr-99 gary0319 wrote:
> Dear Users
> I have just purchased a copy of the SuSE 6.0 Linux with the 2.0.36
> kernel. I am having trouble getting the
> radio utils going. I have the ax25-utils-2.1.42 and net-tools-1.45.
> Mkiss and ax25 kiss support has been enabled.
> At boot time, it shows the ax25 multikiss support being
> initialized. I
> start by placing the net tools and utils (.tar format) in the
> /usr/src
> directory before unzipping per earlier ax25 howto. After compiling
> each
> of the two files and installing, I see the mkiss.c and kissattach.c
> in
> the "/usr/src/ax25-utils-2.1.42/kiss" directory but I cannot locate
> the
> mkiss and kissattach programs. The howto's tell me mkiss and
> kissattach
> should be in the /usr/sbin directory but it is not there. Does Suse
> put
> it some place else? Any suggestions. Thanks for the help.
> (A struggling newbie)
> Gary C. Meyer/W0DYD
> [EMAIL PROTECTED]
----------------------------------
E-Mail: [EMAIL PROTECTED]
Date: 29-Apr-99
Time: 10:47:53
COPYRIGHT means don't copy .....
----------------------------------
