Hi,
did you try to start sccinit manually from the command line? Your problem
description sounds as if sccinit is not called during the startup process...
regards,
Uwe - DG3OW@db0ein.#nds.deu.eu (ax25 packet radio).
Luis Yanes wrote:
> My problem is that after to compile and boot with the new kernel
> sccinit do nothing. Before I could see the board found ok with dmesg
> but now there isn't any message(to say that the board are found or not,
> nothing) nor the board are initialized. Only there is in dmesg the
> info of z8530drv being loaded during boot.
>
> I even deleted the /sbin/sccinit and the one in the /usr/src/z8530
> and rebuilt, and after going totally mad deleted also /etc/z8530.conf
> to hear how sccinit will complaint about missing his config file.
> Nothing, sccinit do nothing, say noting. ;-(
sounds as if sccinit is not even executed! see above...
> So, please where must I look, or what you'll need to know about my
> configuration to help me to make it work?
try to run sccinit from the command line to see (error) messages on the
console. If then the board is initialized check your scripts...
I am running DB0EIN-15 with kernel 2.0.35 and a baycom USCC card at 19200bd.
again regards,
Uwe
