On Thu, 30 Dec 1999, Carlos A Schneider wrote about, USCC board - the saga:
>
> Next, I decided to upgrade the kernel, and installed RH6.0, kernel
> 2.2.5. To achieve this, I had put another HD to obtain more space,
> and a monster(!) 540 MB was added to existing 340 MB.
> Got DL1BKE's USCC driver version 3.0, and compiled it into the
> kernel. No deal. Tried compiling again, with adicional delay for
> PE1HCL's like card defined. No deal.
>
> Before throw in the towel, I tried again some adjusts in the
> port parameters.
> After defining softdcd ON, here is it: the port is working well!
>
> Finally, after 6 months of pain, I got my 9k6 port working, with
> less than 3% of packet loss, no matter how long is the packet length.
> I have to thank to all people that helped me with ideas and tips.
> I'm just sending this to help anyone that could having trouble
> with an USCC card.
Then surely that proves that the modem squelch is not set properly.
If it works with soft dcd then it will work with a _properly set_ hardware
squelch.
> Happy New Year to all!
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
Happy New Year
