In-Reply-To: <99123015131800.00808@pa3gcu>
Message-ID: <[EMAIL PROTECTED]>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
On Thu, 30 Dec 1999, Richard Adams wrote:
> On Thu, 30 Dec 1999, Carlos A Schneider wrote about, USCC board - the saga:
> >
> > Next, I decided to upgrade the kernel, and installed RH6.0, kernel
> > 2.2.5. To achieve this, I had put another HD to obtain more space,
> > and a monster(!) 540 MB was added to existing 340 MB.
> > Got DL1BKE's USCC driver version 3.0, and compiled it into the
> > kernel. No deal. Tried compiling again, with adicional delay for
> > PE1HCL's like card defined. No deal.
> >
> > Before throw in the towel, I tried again some adjusts in the
> > port parameters.
> > After defining softdcd ON, here is it: the port is working well!
> >
> > Finally, after 6 months of pain, I got my 9k6 port working, with
> > less than 3% of packet loss, no matter how long is the packet length.
> > I have to thank to all people that helped me with ideas and tips.
> > I'm just sending this to help anyone that could having trouble
> > with an USCC card.
>
> Then surely that proves that the modem squelch is not set properly.
> If it works with soft dcd then it will work with a _properly set_ hardware
> squelch.
>
> > Happy New Year to all!
> --
> Regards Richard
> [EMAIL PROTECTED]
> http://people.zeelandnet.nl/pa3gcu/
> Happy New Year
>
How can I perform this adjustment? I couldn't find any reference
to such adjustment in the board manual.
Schneider
