Hi.
Today I wired up the wires between my rotor G1000SDX. I run the kctcal,
but found that the wanted value 255 could not be reached. Just a value
of 212 was the maximum. You se the rotor I have has an overlap of 90
degrees. I I turned the rotor these 405 degrees the 255 as well as the
controlvoltage was ok now. 255 and 5 V's.
Well I looked for the rotor command and could not find it.
The I found the kctpos azimut <degrees>, and it worked.
I would be glad if somebody can help me how to get the value 255 ok on
a 360 degrees turn.
The next is my forward.sys and included scripts. Can I use:
x kctpos azimut 45
xc kctpos azimut 45
Tnx for any reply.
73, Erik OZ4KK.
--
**************************************
* *
* Best regards - de bedste hilsener. *
* *
* Erik Jakobsen - [EMAIL PROTECTED] *
* *
**************************************
