I've just installed the ax-25 stuff,
node-0.3.0-1.i386.rpm,
libax25-0.0.7-1.i386.rpm
ax25-tools-0.0.5-1.i386.rpm
ax25-apps-0.0.4-1.i386.rpm
on RedHat 6.2 system (2.2.14-5.0) with a pentium 133 and 80M
ram. Recompiled/installed the kernal (and modules) with ham
radio stuff enabled. Then set up /etc/ax25/axports with the
line: "ax0 W8AN-4 9600 255 2 144.050 MHz (9600 baud)". Modprobe
mkiss successful.
Next "kissattach /dev/ttyS0 ax0 44.70.161.132" followed by
"/etc/rc.d/init.d/ax25d start". Even setup a couple routes to
local radio connections. "listen" commands shows activity on the
port. Everything looks great except my radio will not transmit.
If I try to ping a station I see the "STA" light flicker on the
AEA PK-96 tnc. No transmission.
I can go into minicom and connect to stations ok when kiss is
not active on the tnc, so I know the hardware is hooked up
correctly.
Anybody got a clue where I went wrong?? Thanx
--
73 de Steve
������`������`������`������`������`����
[EMAIL PROTECTED]
http://www.qsl.net/w8an
