Linux-Hardware Digest #352, Volume #9 Thu, 4 Feb 99 01:13:30 EST
Contents:
Re: AdvanSys SCSI + Plextor CDR - opinions please (Ken Witherow)
Re: video card upgrade? ([EMAIL PROTECTED])
Re: Linux on a Toshiba Portege 7010? ("Michael D. Schleif")
Re: can't mount msdos drive ("J�rgen Exner")
HELP !!!!! System commander did not work so good !!!! ("mrushton")
Re: SCSI DAT and backup (Stuart R. Fuller)
Laptop Linux for a Beginner (John P. Raynor)
Re: PCI non wincrap modem (Allen)
Re: Searchung for Multiport Ethernet Cards (Allen)
Re: 2.2.x PnP sound card (SB 16 / Vibra 16) ([EMAIL PROTECTED])
----------------------------------------------------------------------------
From: Ken Witherow <[EMAIL PROTECTED]>
Subject: Re: AdvanSys SCSI + Plextor CDR - opinions please
Date: 4 Feb 1999 04:00:57 GMT
Bernard Cena wrote:
>
> I have an oldish, but still very usable IDE based system
> (P150, 96MB RAM, RedHat 5.1) and want to get a good CDR unit.
> From the stuff I've read Plextor CDRs seem to be the choice
> of the generation - the 4x write, 12x read sounds like a
> nice compromise. I need a SCSI card to go along with it.
> Now, I've heard that AdvanSys has given their whole-hearted
> support to Linux and their cards seem a bucket-load cheaper
> than good ol' Adaptec. I realise I could get a BIOS-less
> Adaptec fairly cheaply, but I want to migrate to SCSI anyway
> so an AdvanSys 940 UW for 1/3 of the price of an Adaptec 2940 UW
> sounds nice.
>
> I'd appreciate the esteemed readers' opinions on AdvanSys
> SCSI cards performance and reliability in general. I'm sure
> it will have no problem handling just a single CDR unit,
> what about a few devices ?
I have an Advansys 940U with a Panasonic 4x8 CDR, a Seagate hard drive,
and a scanner and everything runs nicely. Now when I save up the bucks,
I need to convert the rest of my drives over to SCsI. (AMD k6/233, 64MB
RAM, RH 5.2 w/ extensive miscellaneous upgrades (including kernel
2.2.1)) Now I just can't wait for my new Viper 550 card to come....
------------------------------
From: [EMAIL PROTECTED]
Crossposted-To: comp.sys.ibm.pc.hardware.video,rec.autos.simulators
Subject: Re: video card upgrade?
Date: Thu, 04 Feb 1999 04:09:59 GMT
Reply-To: [EMAIL PROTECTED]
Good luck getting the Celeron to run in a socket 7 MB. Let me know
how it turns out. Maybe if you twist the SEC into a tight square ...
naw.
I actually believe you can get alot of good out of a newer 2d/3d card.
A modest increase in framerate and a noticable improvement in 3d
visual quality. G200 comes in a 8 meg PCI for around $100 dollars.
Voodoo Banshee comes with 16 megs in PCI for slightly less. I haven't
personally seen a TNT for as low as 89 but it may happen soon.
JP
On Wed, 3 Feb 1999 21:49:15 -0500, "Gary"
<[EMAIL PROTECTED]> wrote:
>Bill Jones wrote in message <799qe5$[EMAIL PROTECTED]>...
>>Last night on ZDTV's Screen Savers program, they talked about PC upgrades
>>and said that it makes sense to upgrade older 2D video cards now to a 3D
>>card. They said even an inexpensive card like the TNT ($89??) would be a
>>noticeable improvement.
>
>
>Hi Bill,
>For about the same price you could upgrade your CPU, and probably get as
>good or better improvement overall in your system. Really, try buying a nice
>boxed Celeron 300A and OC it to 450Mhz... if your system is up to the FSB
>100 speed, you'll be flying much faster, video cards are nice, and they will
>help, however you're CPU is now probably as much behind the pack as your
>video card, and the cost to upgrade is comparable... check out some
>overclocking newsgroup discussions and celeron discussions... then think
>about where to put your cash.
>
>Regards
>
------------------------------
From: "Michael D. Schleif" <[EMAIL PROTECTED]>
Subject: Re: Linux on a Toshiba Portege 7010?
Date: Wed, 03 Feb 1999 22:24:37 -0600
Frank Kopp wrote:
>
> has anybody experiences with Linux on a Toshiba Portege 7010?
> I wonder if there are problems with the CD Rom drive because it's only in
> the docking station.
Mine finds the CD-ROM just fine, considering that's how I installed it
;)
> Does the internal modem work?
Yes, but *not* under Linux }:-�
--
Best Regards,
mds
mds resource
888.250.3987
"Dare to fix things before they break . . . "
"Our capacity for understanding is inversely proportional to how much we
think we know. The more I know, the more I know I don't know . . . "
------------------------------
From: "J�rgen Exner" <[EMAIL PROTECTED]>
Subject: Re: can't mount msdos drive
Date: Wed, 3 Feb 1999 16:42:01 -0800
[EMAIL PROTECTED] wrote in message <[EMAIL PROTECTED]>...
>I'm having problems mounting my dos drive - I get the error
>
>mount: wrong fs type, bad option, bad superblock on /dev/hda1, or too
>many mounted file systems
>
>The superblock seems the most likely problem - when I used FIPS to split
>my disk I was told that the drive didn't start of finsh at the beginning
>/ end of the cyllinder.
FAT does not have a superblock, so this can't be the problem.
What command (exact spelling!!) do you use to mount it?
jue
--
J�rgen Exner; microsoft.com, UID: jurgenex
Sorry for this anti-spam inconvenience
------------------------------
From: "mrushton" <[EMAIL PROTECTED]>
Crossposted-To: comp.unix.bsd.freebsd.misc,rec.models.railroad
Subject: HELP !!!!! System commander did not work so good !!!!
Date: 4 Feb 1999 03:02:40 GMT
All you alternate OS folks, HELP !!!!!
I have Win95 on a PC. I tried to use System Commander to load on Red Hat
Linux. I don't think it like worked to good.
I don't see any System Commander Screen. It would just boot to Linux. I
was dead in the water and ready to disembowl myself or jump off the nearest
bridge.
I had a Norton Rescue Disk (Be Prepared). I am back able to boot with Win
95. I have an E drive labled Linux. It looks like it made a partition and
it has Linux on it. About the only thing I can do is log in as root.
What now ??? can I boot off a dos disk, go to E and start Linux ?????
I seem to recall doing something like that on a Dos/Xenix system in another
lifetime.
HELP !!!!!
HELP !!!!!
HELP !!!!!
============================================================================
Mike Rushton [EMAIL PROTECTED]
Some favorite Fallen Flag roads :
D&H LV CNJ DL&W PNER The Laurel Line
Some favorite fallen Colleries :
Huber Harry E (Bucket of Blood) Sullivan Trail Prospect
Railroad and Anthracite Homepage :
http://www.geocities.com/SoHo/Lofts/6444
http://NEPA.railfan.net
====================================================================
------------------------------
From: [EMAIL PROTECTED] (Stuart R. Fuller)
Subject: Re: SCSI DAT and backup
Reply-To: [EMAIL PROTECTED]
Date: Thu, 04 Feb 1999 05:00:03 GMT
Stuart R. Fuller ([EMAIL PROTECTED]) wrote:
: J. P. ([EMAIL PROTECTED]) wrote:
: : On Sun, 31 Jan 1999, Dave Edick <[EMAIL PROTECTED]> wrote:
: : >
: : >The GNU tar that all Linux distributions ship with can do this. You
: : >might need a changer utility to change tapes, though. I use MTX for
: : >this. You can find it at ftp.dandelion.com.
: :
: : If the GNU tar can do multi-volume tar then what is this changer utility
: : for? Doesn't "multi-volume" mean changing cartridges?
:
: "multi-volume" means that the utility can detect the end of a tape, finish
: writing to it and upon the presentation of a subsequent tape, continue writing
: to it.
:
: Generally, these utilities work by either repeatedly polling the device
: looking for new media, or prompting the user for one.
:
: Some media changers, on the unload a tape will automatically load the next
: tape in sequence. However, they make no guarantee that the next tape is the
: one you want.
:
Oops, that last paragraph should read:
Some media changers, when they unload a tape, will automatically load the next
tape in sequence. However, they make no guarantee that the next tape is the
one you want.
Stu
------------------------------
From: [EMAIL PROTECTED] (John P. Raynor)
Crossposted-To: comp.sys.laptops
Subject: Laptop Linux for a Beginner
Date: 4 Feb 1999 05:06:40 GMT
I have to admit that I am currently rather ignorant regarding Linux, but I
would like to change that, so I've been seriously considering getting a
laptop, installing Linux on it, and learning by doing. I have, however,
gotten the distinct impression that Linux and laptops are not always the
best of friends, and that great care in selecting the latter is essential.
I am, furthermore, also on a very tight budget. Can anyone suggest an
older laptop (a 486, or perhaps a 386) that is fully Linux-compatible, and
that won't give a beginner too much frustrating compatibility and
configuration-fiddling trouble? Thanks!
- J. Raynor
------------------------------
From: [EMAIL PROTECTED] (Allen)
Subject: Re: PCI non wincrap modem
Date: 4 Feb 1999 01:37:21 GMT
The specs look great, but the price (under $200) doesn't even begin to
compete with a Best Data internal 56K/V.90 hardware modem (ISA) for
about $57? As long as I've still got at least one ISA slot, I might
as well use it, and when that isn't an option, a $75-95 external modem
might as well make use of the built-in serial ports that I normally
don't even use now??? On the other hand, as a business venture, I
guess someone has to buy the non-"Windows only" stuff, or the
companies that make it will go under, leaving us at the mercy of the
manufacturers who have already crawled up Bill Gates rear for
shelter???
Just my 2 pesos..
Allen
(email addy; user ID portion has a numeral one in place of word
onespoiler, and of course, delete the bogus secondary domain of
nospam.)
fight spam everywhere!!!
The irony is that Bill Gates claims to making a
stable operating system and
Linus Torvalds claims to be trying to take over the
world.
Linux; The Official OS of the New Millennium
http://www.linuxlink.com
On 3 Feb 1999 01:42:02 GMT, "karlo" <[EMAIL PROTECTED]> wrote:
>
>http://www.multitech.com/news/releases/release.asp?ID=75
>
>I have heard that these dudes make a non wincrap pci modem.
>
>karlo
------------------------------
From: [EMAIL PROTECTED] (Allen)
Subject: Re: Searchung for Multiport Ethernet Cards
Date: 4 Feb 1999 01:42:25 GMT
At this time, the only ones that I've found any reference to are the
Adaptec/Cogent ANA 6944? which are Fast ethernet (too) ? I was
reading this in the Linux How-to under supported hardware/network
cards, and following some links there for the Tulip driver.. Hope
this helps.
Allen
(email addy; user ID portion has a numeral one in place of word
onespoiler, and of course, delete the bogus secondary domain of
nospam.)
fight spam everywhere!!!
The irony is that Bill Gates claims to making a
stable operating system and
Linus Torvalds claims to be trying to take over the
world.
Linux; The Official OS of the New Millennium
http://www.linuxlink.com
On Wed, 3 Feb 1999 10:03:42 +0100, "Helmut Herzog" <[EMAIL PROTECTED]>
wrote:
>Hello,
>I am searching for multiport ethernet cards supported by linux. Does
>anywhere know some cards?
>
------------------------------
From: [EMAIL PROTECTED]
Subject: Re: 2.2.x PnP sound card (SB 16 / Vibra 16)
Date: Wed, 03 Feb 1999 19:29:41 -0800
This is a multi-part message in MIME format.
==============EF56E00288EAF1C93F92640E
Content-Type: multipart/alternative;
boundary="------------4985FB852E99F12E1F87936B"
==============4985FB852E99F12E1F87936B
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
[EMAIL PROTECTED] wrote:
> I recently upgraded to the 2.2.1 kernel and ran into some problems. I have a
> real SB Vibra16 PnP, and mine does the same exact thing. It should be IRQ 5,
> with all the other stuff set to defaults. I don't think any of my other
> cards could have taken that IRQ. My modem is an USR 56k with the jumpers set
> to Com 4 If I remember correctly. It works fine though. Other than that
> there's just my video and scanner cards. Linux has always ignored the SCSI
> scanner card before because I didn't bother to set it up. The sndconfig
> program that comes with Redhat detects my card fine, but it can't "modprobe
> -a sound". If I "insmod sb" or "modprobe -a \*" I get an error message like
> "sb.o: init_module: Device or Resource busy.". The soundcore.o and sound.o
> modules load just fine. I'm not sure how to fix this, but ANY solutions are
> welcome!
>
I have a real SB Vibra16 PnP with 2.2.1 and RH-5.2 with isapnptools-1.17. I've
attached my
isapnp.conf and conf.modules files. Try updating your isapnptools. I couldn't get
the sndconfig
to work with the PnP stuff and had to enter the settings manually in the second
section.
>
> In article <793su0$hjk$[EMAIL PROTECTED]>,
> [EMAIL PROTECTED] wrote:
> > I have a Soundblaster 16 PnP clone (detected as Vibra 16). I don't want to
> > set up DOS / Win95 to find the settings for it. I thought the 2.2.x (2.2.1 in
> > my case) kernel had some kind of extended support for these devices? I know
> > that my network card has "stolen" IRQ 5, so I can't use standard settings.
> > How can I find the IRQ from Linux? Do I have to set it up in the BIOS?
> >
> > I have checked the HOWTOs as usual, but I think a lot has changed in the 2.2
> > kernel?
> >
> > Grateful for any useful responses to my stupid question! :-)
> >
> > - Kian Spongsveen
> >
> > -----------== Posted via Deja News, The Discussion Network ==----------
> > http://www.dejanews.com/ Search, Read, Discuss, or Start Your Own
> >
>
> -----------== Posted via Deja News, The Discussion Network ==----------
> http://www.dejanews.com/ Search, Read, Discuss, or Start Your Own
--
"By the time they had diminished from 50 to 8, the other dwarves began
to suspect 'Hungry' ..."
-- Gary Larson, "The Far Side"
aTdHvAaNnKcSe >THANKS 'in' advance<
Michael A. Irons
[EMAIL PROTECTED]
ICQ:9286466
WARNING:
It is unlawful to use this email address for unsolicited ads
==============4985FB852E99F12E1F87936B
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
[EMAIL PROTECTED] wrote:
<blockquote TYPE=CITE>I recently upgraded to the 2.2.1 kernel and ran into
some problems. I have a
<br>real SB Vibra16 PnP, and mine does the same exact thing. It should
be IRQ 5,
<br>with all the other stuff set to defaults. I don't think any of
my other
<br>cards could have taken that IRQ. My modem is an USR 56k with
the jumpers set
<br>to Com 4 If I remember correctly. It works fine though.
Other than that
<br>there's just my video and scanner cards. Linux has always ignored
the SCSI
<br>scanner card before because I didn't bother to set it up. The
sndconfig
<br>program that comes with Redhat detects my card fine, but it can't "modprobe
<br>-a sound". If I "insmod sb" or "modprobe -a \*" I get an error
message like
<br>"sb.o: init_module: Device or Resource busy.". The soundcore.o
and sound.o
<br>modules load just fine. I'm not sure how to fix this, but ANY solutions
are
<br>welcome!
<br> </blockquote>
I have a real SB Vibra16 PnP with 2.2.1 and RH-5.2 with
isapnptools-1.17. I've attached my
<br>isapnp.conf and conf.modules files. Try updating your isapnptools.
I couldn't get the sndconfig
<br>to work with the PnP stuff and had to enter the settings manually in
the second section.
<blockquote TYPE=CITE>
<br>In article <793su0$hjk$[EMAIL PROTECTED]>,
<br> [EMAIL PROTECTED] wrote:
<br>> I have a Soundblaster 16 PnP clone (detected as Vibra 16). I don't
want to
<br>> set up DOS / Win95 to find the settings for it. I thought the 2.2.x
(2.2.1 in
<br>> my case) kernel had some kind of extended support for these devices?
I know
<br>> that my network card has "stolen" IRQ 5, so I can't use standard
settings.
<br>> How can I find the IRQ from Linux? Do I have to set it up in the
BIOS?
<br>>
<br>> I have checked the HOWTOs as usual, but I think a lot has changed
in the 2.2
<br>> kernel?
<br>>
<br>> Grateful for any useful responses to my stupid question! :-)
<br>>
<br>> - Kian Spongsveen
<br>>
<br>> -----------== Posted via Deja News, The Discussion Network ==----------
<br>> <a
href="http://www.dejanews.com/">http://www.dejanews.com/</a>
Search, Read, Discuss, or Start Your Own
<br>>
<p>-----------== Posted via Deja News, The Discussion Network ==----------
<br><a
href="http://www.dejanews.com/">http://www.dejanews.com/</a>
Search, Read, Discuss, or Start Your Own</blockquote>
<pre>--
"By the time they had diminished from 50 to 8, the other dwarves began
to suspect 'Hungry' ..."
-- Gary Larson, "The Far Side"
aTdHvAaNnKcSe >THANKS 'in' advance<
Michael A. Irons
[EMAIL PROTECTED]
ICQ:9286466
WARNING:
It is unlawful to use this email address for unsolicited ads</pre>
</html>
==============4985FB852E99F12E1F87936B==
==============EF56E00288EAF1C93F92640E
Content-Type: text/plain; charset=us-ascii;
name="conf.modules"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="conf.modules"
alias dummy0 dummy
alias sound sb
alias midi opl3
options opl3 io=0x388
options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330
==============EF56E00288EAF1C93F92640E
Content-Type: text/plain; charset=us-ascii;
name="isapnp.conf"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="isapnp.conf"
# $Id: pnpdump.c,v 1.17 1998/11/10 22:45:04 fox Exp $
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of this file format, see isapnp.conf(5)
#
# For latest information on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR
#
# Trying port address 0203
# Board 1 has serial identifier 6d ff ff ff ff f0 00 8c 0e
# (DEBUG)
(READPORT 0x0203)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
# Card 1: (serial identifier 6d ff ff ff ff f0 00 8c 0e)
# Vendor Id CTL00f0, No Serial Number (-1), checksum 0x6D.
# Version 1.0, Vendor version 1.0
# ANSI string -->Creative ViBRA16X PnP<--
#
# Logical device id CTL0043
# Device supports vendor reserved register @ 0x3a
# Device supports vendor reserved register @ 0x3d
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE CTL00f0/-1 (LD 0
# ANSI string -->Audio<--
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# IRQ 5.
# High true, edge sensitive interrupt (by default)
(INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 1.
# 8 bit DMA only
# Logical device is not a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
(DMA 0 (CHANNEL 1))
# Next DMA channel 3.
# 8 bit DMA only
# Logical device is not a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
(DMA 1 (CHANNEL 5))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0220
# IO base alignment 1 bytes
# Number of IO addresses required: 16
(IO 0 (BASE 0x220))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0330
# Maximum IO base address 0x0330
# IO base alignment 1 bytes
# Number of IO addresses required: 2
(IO 1 (BASE 0x0330))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0388
# Maximum IO base address 0x0388
# IO base alignment 1 bytes
# Number of IO addresses required: 4
(IO 2 (SIZE 4) (BASE 0x0388))
# Start dependent functions: priority acceptable
# IRQ 5, 7, 9 or 10.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is not a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
# Next DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is not a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 0))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0280
# IO base alignment 32 bytes
# Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0300
# Maximum IO base address 0x0330
# IO base alignment 48 bytes
# Number of IO addresses required: 2
# (IO 1 (BASE 0x330))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0388
# Maximum IO base address 0x0388
# IO base alignment 1 bytes
# Number of IO addresses required: 4
# (IO 2 (SIZE 4) (BASE 0x0388))
# Start dependent functions: priority acceptable
# IRQ 5, 7, 9 or 10.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is not a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
# Next DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is not a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 0))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0280
# IO base alignment 32 bytes
# Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0300
# Maximum IO base address 0x0330
# IO base alignment 48 bytes
# Number of IO addresses required: 2
# (IO 1 (SIZE 2) (BASE 0x0300))
# Start dependent functions: priority acceptable
# IRQ 5, 7, 9 or 10.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is not a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
# Next DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is not a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 1 (CHANNEL 0))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0280
# IO base alignment 32 bytes
# Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
# Start dependent functions: priority functional
# IRQ 5, 7, 9 or 10.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is not a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0280
# IO base alignment 32 bytes
# Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0300
# Maximum IO base address 0x0330
# IO base alignment 16 bytes
# Number of IO addresses required: 2
# (IO 1 (SIZE 2) (BASE 0x0300))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0388
# Maximum IO base address 0x0394
# IO base alignment 4 bytes
# Number of IO addresses required: 4
# (IO 2 (SIZE 4) (BASE 0x0388))
# Start dependent functions: priority functional
# IRQ 5, 7, 9 or 10.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is not a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
# (DMA 0 (CHANNEL 0))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0280
# IO base alignment 32 bytes
# Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220))
# End dependent functions
(NAME "CTL00f0/-1[0]{Audio }")
(ACT Y)
))
#
# Logical device id CTL7005
# Device supports vendor reserved register @ 0x3a
# Device supports vendor reserved register @ 0x3d
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE CTL00f0/-1 (LD 1
# Compatible device id PNPb02f
# ANSI string -->Game<--
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0201
# Maximum IO base address 0x0201
# IO base alignment 1 bytes
# Number of IO addresses required: 1
(IO 0 (SIZE 1) (BASE 0x0201))
# Start dependent functions: priority acceptable
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0200
# Maximum IO base address 0x020f
# IO base alignment 1 bytes
# Number of IO addresses required: 1
# (IO 0 (SIZE 1) (BASE 0x0200))
# End dependent functions
(NAME "CTL00f0/-1[1]{Game }")
(ACT Y)
))
# End tag... Checksum 0x00 (OK)
# Returns all cards to the "Wait for Key" state
(WAITFORKEY)
==============EF56E00288EAF1C93F92640E==
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.hardware) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Hardware Digest
******************************
