Linux-Hardware Digest #11, Volume #13 Fri, 9 Jun 00 04:13:07 EDT
Contents:
Re: CD-RW HP 9100i (David Lerner)
Re: RF ruling - 3Com/USR 5690 Winmodem or not (Rob Clark)
Re: DIVA T/A ISDN Modem ("Pat Crean")
Re: The Perfect Linux Video Card (Eric Ho)
Guillemot Cougar Video edition linux? (Matthew J Zukowski)
Lost interrupt problem with 2 NE2K-pci cards (Cliff Koch)
Re: Need your help again... (Pieter Breugelmans)
Re: modules on separate /usr - can't initialize from loadlin (Yuri Oskotsky)
Re: Athlon recomendations (Joel Beach)
2.2.15 + USB patch hangs on my Athlon (Anders Skovsted Buch)
Re: [RH6.1]DMESG: SMP motherboard not detected (knl: 2.2.12 2.2.15 ("David ..")
Re: modem ("bluster")
Re: Using external ISDN modem in Linux (Raffaele Biscosi)
Re: Please help me install my 3Com 3c509B ISA NIC :-) ("bluster")
Lexmark 5000 & Palm3e ("Stu")
Re: Athlon recomendations (Joe Pfeiffer)
Re: HELP: SIMPLE IRQ Routine Crashes (Arnaud Westenberg)
Re: HELP: SIMPLE IRQ Routine Crashes (Arnaud Westenberg)
----------------------------------------------------------------------------
From: [EMAIL PROTECTED] (David Lerner)
Subject: Re: CD-RW HP 9100i
Date: Fri, 09 Jun 2000 02:24:32 GMT
[EMAIL PROTECTED] wrote:
>
> Hi all!
> I am a rather new commer to linux world.
> Nevertheless I have been exploring all fstab doc, cdrom-howto's and
> moste of available messages in the group.
>
> But still a total failure to use this CD-RW HP 9100i with Linux Mandrak.
>
> fs type is told to be wrong, or too much file sytem mounted...
> I installed Linux from the cd drive. Then it is fully functional.
> (Wrong?)
>
> I don't know if problems are due to fstab or something else. Help!
>
>What command are you trying to enter that gives you an error?
>What does your /etc/fstab look like?
>
>--
>Mark Bratcher
>mailto:[EMAIL PROTECTED]
>---------------------------------------------------------
>Escape from Microsoft's proprietary tentacles: use Linux!
The 9100i, like other ATAPI devices appears as an ide device with most
Linux distributions. Thus, you probably can use it as an ordiaryy CD
reader at /dev/hdc. Look at the boot up messages in /var/log/dmesg
to see if and how the drive is recognized.
To use the 9100i as a read/write device you will need to recompile the
kernel. The support for ide CDROM drives must be turned off, and scsi
emulation and scsi cdrom support must be turned on. When you reboot with
the new kernel the 9100i will appear as /dev/scd0 and it can be used as
a cdrom at that device.
You can write CDs with the 9100i by using the cdrecord program to write
the image. The arguement dev=0,0,0 is usually passed to cdrecord
to identify the equivalent scsi bus device for I/O. See the cdrecord man
page and documentation for more information on writing.
The current version of cdrecord is unable to create multi-session CDs
on the 9100i. Single session CDs are no problem. This may be fixed in
future release.
Dave
------------------------------
Subject: Re: RF ruling - 3Com/USR 5690 Winmodem or not
From: [EMAIL PROTECTED] (Rob Clark)
Date: Fri, 09 Jun 2000 03:15:30 GMT
In article <[EMAIL PROTECTED]>,
Jake Gibbons <[EMAIL PROTECTED]> wrote:
>of articles about successful installation under Linux. Also, it is
>listed in the LHD with a high rating, and good review
>(http://lhd.datapower.com/db/dispproduct.php3?DISP?231).
Clearly this entry is wrong. I suggest contacting the owner
of that site at [EMAIL PROTECTED] to get the record fixed.
The link on the page takes you to the 3Com specs page where it states it
is a "Faxmodem for Windows."
---
The next site is mine:
>In the Linux/Modem Compatibility KB
>(http://www.o2.net/~gromitkc/20000604a.html) I later found this entry:
> Model 5690-00, U.S. Robotics PCI 56K FAX Voice
> Winmodem
> PCI\VEN_12B9&DEV_1006&SUBSYS_006812B9&REV_00).
In the current 3Com/USR numbering system, the numbers after the hyphen are
revision numbers. The 5690's are only up to 5690-00, so, no, there is no
difference. This is an expensive Winmodem.
You can crosscheck your modem with the FCC registration number
silk-screened on your card and the output of lspci -v
(Vendor=12B9, Device=1006).
Rob Clark, [EMAIL PROTECTED]
http://www.o2.net/~gromitkc/winmodem.html
------------------------------
From: "Pat Crean" <[EMAIL PROTECTED]>
Subject: Re: DIVA T/A ISDN Modem
Date: Mon, 5 Jun 2000 16:24:30 -0400
Piece of cake --- just make sure you're using pppd version 2.3.11 or
higher --- if you don't, you won't be able to get MLPPP working.
"Mahendra Gunawardena" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> Does anyone out there have had success configuring a DIVA T/A ISDN Modem
>
------------------------------
From: Eric Ho <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.x
Subject: Re: The Perfect Linux Video Card
Date: 9 Jun 2000 04:22:32 GMT
My Matrox Mystique (PCI with 4Meg) runs fine at 1280x1024x24, so 16Meg
should be plenty.
Best Regards,
Eric Ho
In comp.os.linux.hardware Ronald Cole <[EMAIL PROTECTED]> wrote:
: hac <[EMAIL PROTECTED]> writes:
:> I have a Matrox Millenium II PCI that runs fine at 1280x1024x24.
: I'd need 16Mb for 24 or 32bbp, right?
:> They may be out of production, but are still widely available.
: Where? I've been unable to locate one from my usual suppliers.
:> The G200's have a PCI version, and are in production.
: All the G200's I've seen were 8Mb versions.
: Do both of these cards only come in 8Mb versions and need to be
: upgraded to 16Mb?
: --
: Forte International, P.O. Box 1412, Ridgecrest, CA 93556-1412
: Ronald Cole <[EMAIL PROTECTED]> Phone: (760) 499-9142
: President, CEO Fax: (760) 499-9152
: My GPG fingerprint: C3AF 4BE9 BEA6 F1C2 B084 4A88 8851 E6C8 69E3 B00B
------------------------------
From: Matthew J Zukowski <[EMAIL PROTECTED]>
Subject: Guillemot Cougar Video edition linux?
Date: 9 Jun 2000 04:11:24 GMT
Picked up spair video card while my real tnt2 is replaced. As it turns
out it has onboard video capture and output. Woo Woo. A TNT2 m64. Budget
but uses the same drivers as parent TNT2.
Question, what is the status of drivers for cards with the Brooktree 869
tv out, and the Micronas VPX3225D Video in? I think the Voodoo TV also
shares a commen chipset, so it's not far fetched that someone might be
working on such a project.
thanks...
matt
------------------------------
From: Cliff Koch <[EMAIL PROTECTED]>
Subject: Lost interrupt problem with 2 NE2K-pci cards
Date: Fri, 09 Jun 2000 00:01:41 -0500
I have two clone (realtek) NE2K PCI network cards in my PC and am having a
problem with "lost interrupts" on eth0. When the cards come up, they are both
assigned to IRQ17 via the APIC. eth1 works great. When attempting to ping
out on eth0, I get occasional
"<7>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=788."
messages. At one point, both cards were working, but one was assigned to
IRQ17 and one to IRQ18. When I first installed the second card, both were
assigned to IRQ17 and I had the same problem. I fiddled with things and
finally put some ether= statements into lilo boot parameters and suddenly one
card was on IRQ17 and one was on IRQ18 and everything worked great. It
appears the ether= statements had nothing to do with the IRQ being assigned
differently, as they are having no effect now. I have no idea why the boot up
configuration changed, but it did and now things no longer work. Under
Windoze98, both cards are on IRQ10 and they both work fine.
So, any ideas on why the cards can't share the interrupt correctly, or,
any ideas how I can force the cards onto different interrupts? I really need
the second LAN back up as this box plays firewall to my other computers.
Thanks,
Cliff
--
==========================================================================
Cliff Koch
[EMAIL PROTECTED]
------------------------------
From: Pieter Breugelmans <[EMAIL PROTECTED]>
Crossposted-To: alt.comp.hardware,de.comp.os.unix.linux.hardware
Subject: Re: Need your help again...
Date: Fri, 09 Jun 2000 07:04:55 +0200
Yep.. you are absolute correct ... and in my opinion, 30MB/s is quite a lot cos
other people that i know get around 24Mb/s with UDMA66. Anyway... your PCI-bus is
running at 33MHz, and this will give you a maximum transferrate of 133MB/s (don't
ask me any math.. cos i seem to have forgotten it :)...See why the manufactures
are making the UMDA100? ... just optimizing the speed....
Greetings,
Pieter
Dances With Crows schreef:
> On Thu, 8 Jun 2000 19:56:32 +0200, Thirsty McGuinness
> <<8homt6$4sa$[EMAIL PROTECTED]>> shouted forth into the ether:
> >Thanks for answering my last question. The new one:
> > I now have both ATA66-devices at the primary-channel, the two cd-drives at
> > the secondary.
> >Although I�m sure that the chipset goes with UDMA66, benchmarking the drives
> > results in a maximum-transfer-rate of only 30MB/s.
> > I switched the drives to UDMA and also tried a lot of benchmark-progr.s,
> > always with the same result (or lower).
> > I got a further SCSI-drive via AHA2940U-adapter, but I don�t think that got
> > sth. to with it... (Why should it?)
> > What could be the reason for that again?
>
> There are a couple of potential bottlenecks when it comes to data transfer
> to/from a hard drive. Bus speed is the one everybody focuses on, which is
> why we have UDMA/66 everything. The rate at which data can flow off of
> the HDA (head-disk-assembly) is the other one, which gets neglected a lot.
> Basically, the platters aren't spinning fast enough/the heads are seeking
> too much to keep up with the bus speed.
>
> I repeat--if having the best performance is your goal, ditch IDE and buy
> up some 10000 RPM SCSI drives. I think you might be able to find 10000
> RPM IDE drives, but they're noisy as hell, run hot, suck power, and cost
> too much for the average user. I'm surprised you managed to get 30M/s out
> of a 7200 RPM IDE drive, but hey. Just don't get suckered in by the hype;
> the slow mechanical disks can't keep up with the fast electronic bus and
> won't be able to for a long time now that ATA/100 is coming out.
>
> > Hope I don�t knock on your nerves,
>
> The question? No. Posting the same article twice? er, yes.
>
> --
> Matt G / Dances With Crows \###| You have me mixed up with more
> There is no Darkness in Eternity \##| creative ways of being stupid?
> But only Light too dim for us to see \#| Beer is a vegetable. WinNT
> (Unless, of course, you're working with NT)\| is the study of cool. --MegaHAL
--
Sender : Pieter 'Ravefiend' Breugelmans
E-Mail (home) : [EMAIL PROTECTED]
or : [EMAIL PROTECTED]
E-Mail (school) : [EMAIL PROTECTED]
HomeURL: not available for the moment :)
My statement: "There's a good person in every one of us..."
------------------------------
From: Yuri Oskotsky <[EMAIL PROTECTED]>
Subject: Re: modules on separate /usr - can't initialize from loadlin
Date: Thu, 08 Jun 2000 22:12:40 -0700
whichever... I was too lazy to reboot into linux to check... 8-)
Gene Heskett wrote:
> Unrot13 this;
> Reply to: <[EMAIL PROTECTED]>
>
> Gene Heskett sends Greetings to Yuri Oskotsky;
>
> YO> Sorry for the rushed post, I have already figured this one out:
> YO> autoboot folder contains kernel 2.2.5, but the kernel installed
> YO> at installation time is 2.2.19. And therefore dependencies were
>
> There isn't yet a 2.2.19 kernel. 2.2.16 was just published yesterday.
>
> Cheers, Gene
> --
> Gene Heskett, CET, UHK |Amiga A2k Zeus040, Linux @ 400mhz
> Ch. Eng. @ WDTV-5 |This Space for rent
> RC5-Moo! 350kkeys/sec, Seti@home 16 hrs a block
> email gene underscore heskett at iolinc dot net
> This messages reply content, but not any previously quoted material, is
> � 2000 by Gene Heskett, all rights reserved.
> --
------------------------------
From: Joel Beach <[EMAIL PROTECTED]>
Subject: Re: Athlon recomendations
Date: Fri, 09 Jun 2000 05:28:09 GMT
"Gero H. Marten" wrote:
> > John in SD wrote:
> >
> > I have been running a BCM/GVC mobo with an early Athlon 600 since Sept 99.
> > Maxtor IDE disks (3). The system is rock solid. I have RH6.1 running now.
> >
> > --John Coffman
> >
> > On Thu, 08 Jun 2000 05:01:13 +0000, Christopher Segot <[EMAIL PROTECTED]>
> > wrote:
> >
> > >Hello, I am about to upgrade my system, I am considering an athlon with
> > >redhat, however on their hcl they say that the athlon may not work
> > >depending on the system config. Can anybody recomend a good
> > >mboard,cpu,hd combo ?
> > >thanks alot.
> > >
> > >
> > >Chris
> >
> > LILO version 21.4.3 (06-May-2000) source at
> > ftp: sd.dynhost.com dir: /pub/linux/lilo
>
> You obviously aren't serving a network, running apache, sendmail, inn,
> junkbuster, bind, samba, etc. simultaneously. Athlons are never used
> as servers, because they are not 100% i386 compatible. Remember, Linux
> was written for the i386 chipset. More questions? Be advised, not to
> by an Athlon if you want to do serious work under Linux. On the other
> hand, if you just want to peep into Linux and otherwise use Windoze,
> be happy.
This is the biggest pile of rubbish I have ever heard!!! Linux is written for
i386 but it now includes support in the kernel for Athlon-optimised compiler
flags. For god's sake, Alan Cox has an Athlon. How often do you think he is
using Windows?....
Joel
>
>
> --
> Gero H. Marten
> <http://www.provi.de/gmarten/>
> --
------------------------------
From: Anders Skovsted Buch <[EMAIL PROTECTED]>
Subject: 2.2.15 + USB patch hangs on my Athlon
Date: Fri, 09 Jun 2000 01:28:30 -0400
Hi,
I am using RedHat 6.1 on my Athlon 500, and have recently installed a
2.2.15
kernel with the USB backport patch. After that my machine has had
occational
lockups. Before it was running rock-solid. Does anybody know about a
fix? (If
it matters I have my ATAPI CD-RW configured as an scsi device.)
Any help will be greatly appreciated!!
Anders Buch ([EMAIL PROTECTED])
------------------------------
From: "David .." <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.setup
Subject: Re: [RH6.1]DMESG: SMP motherboard not detected (knl: 2.2.12 2.2.15
Date: Fri, 09 Jun 2000 00:16:52 -0500
[EMAIL PROTECTED] wrote:
>
> I have been having trouble getting a new system up and running with all
> its hardware in use. Namely, I cannot seem to get SMP working on the
> system. Any help or suggestions would be greatly appreciated.
>
> Thank you,
> Shawn
cat /proc/cpuinfo
This should show a processor 0 and processor 1 if both are being used.
Where the 0 is 1 and the 1 is the second processor
or try "uname -v" if it has SMP in the results such as shown below it is
an SMP kernel.
#1 SMP Thu Jun 8 18:19:12 CDT 2000
^^^
|
|_____ This is what you are looking for. The rest is just the date
and time
of the query and time zone and year.
If you don't find the SMP then you don't have the SMP kernel compiled.
--
Registered with the Linux Counter. http://counter.li.org
ID # 123538
------------------------------
From: "bluster" <[EMAIL PROTECTED]>
Subject: Re: modem
Date: Fri, 9 Jun 2000 02:44:09 -0400
Jeff <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> How do I set up my modem in fstab?
fstab stands for File System TABle you set up disk drives there
not the modem...
You don't say what you want to do with your modem,
but if you want to set up ppp (internet) access then
run "linuxconf" as root and look in the "network" -> "client tasks"
area for the ppp setup.
> And how do i make it so any user can
> access my cdrom?
To allow any regular (non-root) user to mount/unmount and read
the cdrom drive edit /etc/fstab (the file system table) and look for
the cdrom line, it will look something like this:
/dev/cdrom /mnt/cdrom iso9660 user,exec,ro,noauto 0 0
add the "user" mount option where you see it above (field #4)
hope this helps!
bluster
------------------------------
From: Raffaele Biscosi <[EMAIL PROTECTED]>
Subject: Re: Using external ISDN modem in Linux
Date: Fri, 09 Jun 2000 09:06:03 +0200
Reply-To: [EMAIL PROTECTED]
Johan Almen wrote:
>
> Hi all.
>
> [ lines deleted ]
>
> I think the problem is with kppp rather than my modem. Is there
> a script file for kppp connections that I can edit, removing
> everything but the basics?
>
yes, it is located in $HOME/.kde/share/config and is called
kppprc.
HTH
Raffaele
--
_________________________________________________
\ / [EMAIL PROTECTED]
\ / Consultant Open Systems
\/
/\ Xtelligent IT Consulting GmbH
/ \ Schulstr. 36 <> D-61191 Rosbach vor der Hoehe
/ \ Tel./Fax. 0-700-98355443 <> www.xtelligent.de
------------------------------
From: "bluster" <[EMAIL PROTECTED]>
Subject: Re: Please help me install my 3Com 3c509B ISA NIC :-)
Date: Fri, 9 Jun 2000 03:37:00 -0400
i have two of these 3c509b cards in a box (P120) with a sound blaster...
had some problems with the setup myself...
yes > 1. Check /proc/interrupts & ioports to find unused ones.
yes > 2. Disable PNP BIOS
yes > 3. Use the card's DOS utility to "hardwire" in an IRQ and IO
> 4. Add the following to conf.modules
> "options eth0 irq=11
> alias eth0 3c509"
this is a copy of my conf.modules... the option line had to be commented
out to get the second card to work (which it does automagically!)
but either of the options irq or io could be left out to use automatic
detection for that option
[root@mybox relay]# cat /etc/conf.modules
alias parport_lowlevel parport_pc
alias eth0 3c509
# options 3c509 io=0x280 irq=11
alias eth1 3c509
alias sound-slot-0 sb
options sound dmabuf=1
alias midi opl3
options opl3 io=0x388
options sb io=0x220 irq=5 dma=1 mpu_io=0x330
> 5. Reboot
NO NO NO you do not have to reboot!!!
(only to use the DOS 3com setup disk)
to re-start the ethernet card with new settings while linux is
running use the "ifdown" (InterFace DOWN) and the "ifup" (InterFace UP)
commands,
as root type:
/sbin/ifdown eth0
/sbin/ifup eth0
to restert networking type:
/etc/rc.d/init.d/network restart
(on a redhat sysV init type system)
Amanda Hammond <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> On Tue, 30 May 2000 00:03:43 GMT, Adrian Silveanu wrote:
>
> >Hi,
> >
> > I recently had to deal with this card and also ran into a lot
> >of problems, even though it is mention in the HOWTO as stable.
> >The problem maker in my case was my Sound Blaster 16 with on board
> >IDE controller.
>
> I removed the SB16 from the start. :-)
>
> >A couple of other things. Why don't
> >you try having the NIC installed in the kernel instead of being a
> >module?
>
> That's a whole other can o' worms that I'd prefer not to open if at
> all possible. I'd like to make sure I'm doing everything right with
> the module. If I am, and it still doesn't work, then I'll try the
> kernel rebuild.
>
> >Modules can be troublesome went things aren't working right.
> >Also in your BIOS, if you have Plug and Play on, set the IRQ that you
> >are using for the card from PCI/PnP to ISA/Legacy.
>
> I have my BIOS set to PnP OS _disabled_, should I (or will I still be
> able to) set this IRQ to ISA/Legacy?
>
> >That way that IRQ
> >will not be available to PnP cards. Also if you set the connector
> >used with the DOS utility to Auto Detect, Linux will use 10BaseT
> >no matter what, because the Auto Detect function doesn't work in the
> >driver. And just so that I hopefully cover everything, since
> >the AUI connector is rarely used, are you sure that's the connecter
> >you want to use? 10BaseT is like the telephone cable, but wider.
> >10Base2 is like TV coax cable. AUI is like the joystick connector.
> Yes, you're right. I am using RJ45, so I've switched that back.
>
> If you're still with me, please let me know if I've got the steps that
> I need to install this thing. Let me recap:
>
> 1. Check /proc/interrupts & ioports to find unused ones.
> 2. Disable PNP BIOS
> 3. Use the card's DOS utility to "hardwire" in an IRQ and IO
> 4. Add the following to conf.modules
> "options eth0 irq=11
> alias eth0 3c509"
> 5. Reboot
>
> (Note: I am running RH 6.2)
> When I cat /proc/interrupts, my card doesn't show up, but it does show
> up in the /proc/ioports with the setting I hardwired into the card.
>
> Do any of you see any glaring omissions, or have any recommendations?
>
> Thanks very much everybody, I've looked into each suggestion. :-)
> I've probably logged close to 30 long (albeit educational) hours
> trying to get this card working... please, don't let me get to 40! :-)
>
> Thanks very much,
> Amanda :-)
------------------------------
From: "Stu" <[EMAIL PROTECTED]>
Crossposted-To: alt.os.linux.mandrake,alt.os.linux.suse
Subject: Lexmark 5000 & Palm3e
Date: Fri, 9 Jun 2000 08:47:04 +0100
Hi Guys,
I have tried to install both Mandrake and Suse Linux but ended up
removing both due to no support of my Lexmark 5000 printer and any PIM for
my Palm3e. If anyone knows of a driver for the printer or a Linux PIM that
works with the Palm 3e then I'll re-install.
I really want to change to Linux but the above needs to be addressed first.
Please help.
Stu
------------------------------
From: Joe Pfeiffer <[EMAIL PROTECTED]>
Subject: Re: Athlon recomendations
Date: 09 Jun 2000 01:42:29 -0600
> In article <[EMAIL PROTECTED]>, Gero H. Marten wrote:
>
> >You obviously aren't serving a network, running apache, sendmail, inn,
> >junkbuster, bind, samba, etc. simultaneously. Athlons are never used
> >as servers, because they are not 100% i386 compatible. Remember, Linux
> >was written for the i386 chipset. More questions? Be advised, not to
> >by an Athlon if you want to do serious work under Linux. On the other
> >hand, if you just want to peep into Linux and otherwise use Windoze,
> >be happy.
Surely you're not serious. What's the 386 chipset, for starters...
Linux runs quite well on architectures like Alpha that don't even
resemble a 386, let alone upward-compatible architectures like Athlon
(and 486, Pentium, Pentium Pro, Pentium II...).
I do all my work under Linux, and I'm very happy with my Athlon-based
system.
--
Joseph J. Pfeiffer, Jr., Ph.D. Phone -- (505) 646-1605
Department of Computer Science FAX -- (505) 646-1002
New Mexico State University http://www.cs.nmsu.edu/~pfeiffer
VL 2000 Homepage: http://www.cs.orst.edu/~burnett/vl2000/
------------------------------
Date: Fri, 09 Jun 2000 08:22:17 +0200
From: Arnaud Westenberg <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.development.apps,comp.os.linux.development.system
Subject: Re: HELP: SIMPLE IRQ Routine Crashes
Tod Daniels wrote:
> Here is the output from the KERN_DEBUG message:
See rubini's book about making (a little) more sense of oopses
> The code I wrote to service the interrupt is as follows:
[snip]
> if (request_irq(Card->Irq, &dcpInterruptService, 0,
[/snip]
Don't use the address of operator (&) in front of your handler name, the
name alone is already a handler.
Regards Arnaud
------------------------------
Date: Fri, 09 Jun 2000 08:24:24 +0200
From: Arnaud Westenberg <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.development.apps,comp.os.linux.development.system
Subject: Re: HELP: SIMPLE IRQ Routine Crashes
> Don't use the address of operator (&) in front of your handler name, the
> name alone is already a handler.
fu^%#%^&* I meant the handler name is already a pointer! sh&^%&($(&^t
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.hardware) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Hardware Digest
******************************
