Linux-Hardware Digest #503, Volume #13 Wed, 30 Aug 00 22:13:06 EDT
Contents:
Re: A7V, Promise and Linux ([EMAIL PROTECTED])
Re: why lots of bad hardware suddenly discovered upon linux (John Klaus)
Re: Internal Modem (John-Paul Stewart)
Re: Diamond Viper II Video Card--- HELP, I NEED A DRIVER (Andrey Vlasov)
Multi-session CD's without -eject (cdrecord) (Craig Setera)
Re: Copying DVDs (Dave Blake)
Re: Linksys LNE100TX weird behavior??? (Andrey Vlasov)
Re: Will this computer run Linux???? (Christopher Browne)
Re: Multi-session CD's without -eject (cdrecord) (Dances With Crows)
Help building a Duron 600/K7V system (as)
Re: Copying DVDs ("Chris Severn")
Re: 2nd NIC failure ("Darren and Marla Welson")
ne.o: fails to initialize in Corel Linux 1.2 (Second Edition) (Arcana)
Re: why lots of bad hardware suddenly discovered upon linux installations? (Maniac)
Re: Kernel Option for PIII Processor? ("Chan Chung Hang Christopher")
Re: Xircom realport driver on RH 6.2 ("Ken Crofts")
----------------------------------------------------------------------------
From: [EMAIL PROTECTED]
Crossposted-To: alt.comp.periphs.mainboards.asus
Subject: Re: A7V, Promise and Linux
Date: Wed, 30 Aug 2000 22:58:59 GMT
Goto www.linux-ide.org and get the latest patch to 2.2.16, it has
promise support and it works for my a7v...
In article <go6r5.1433$[EMAIL PROTECTED]>,
"Horst Simon" <[EMAIL PROTECTED]> wrote:
> I just recently changed from a K6-2/450 to a Duron-700. First I had a
Epox M/B,
> all worked ok with this mothermoard, except power on. After a soft
power off, I could
> not power on with the front panel power switch. I had to power off/on
on the power
> supply. This happened only when it was powered off more then 4-5
hours.
> Since I didn't wan't to crawl under the desk for power on I decided to
return the epox
> board and spend more money for a ASUS A7V, because I had good
experience with
> the early ASUS Pentium boards.
> When I started up for the first time, I got constant blue screens in
W2000 and NT4, Linux
> got disk errors and segmentation faults.
> I swapped my memory around into different slots a few times and it
hasn't failed since this
> time.
> I have an A7V with the dip-switches and bios 1002.
> SB-LIVE in slot 3
> Nvidia TNT2 32MB AGP Card
> INTEL 10/100 eepro in slot 5
> Seagate 20MB ST320423
> CD-ROM Memorex 48x
> 256MB memory 133's, which are 2 x 128MB. One module is TT and the
other Hyundai.
>
> I have the normal BIOS settings and the memory set to 133. Installed
additional chassis fan.
>
> The system has W2K, NT4 and SuSE Linux 6.4. I have not encountered any
problems, after
> sorting out the inital problems, which were probably not well seated
memory modules.
>
> Now I try to get the Promise ATA100 controller working under Linux. It
works very well under
> NT4 and W2K, after installing the drivers from VIA and Promise, but
Linux can not recognize
> any drive on the Promise/ATA100 controller.
>
> Anyone aware of any drivers for Linux?
>
> Regards,
> Horst Simon
>
> <[EMAIL PROTECTED]>
>
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
From: John Klaus <[EMAIL PROTECTED]>
Crossposted-To: alt.os.linux.mandrake,comp.os.linux.setup
Subject: Re: why lots of bad hardware suddenly discovered upon linux
Date: Wed, 30 Aug 2000 18:21:59 -0500
For pretty much the same reason Ferrai's have to be tuned up ten times mo=
re
often than Geo Metro's. Welcome to the bleeding edge pal... :)
JK
Dan Jacobson wrote:
>
> True, good possibilities, but I still see a lot of postings where lots =
of
> bad hardware is suddenly discovered upon Linux installations... One wou=
ld
> wonder why didn't these problems didn't appear before they changed from=
> other leading brand OS...
> --
> www.geocities.com/jidanni ... fix e-mail address to reply; =BFn=A4=A6=A5=
=A7
> Tel:+886-4-5854780; starting in year 2001: +886-4-25854780
------------------------------
From: John-Paul Stewart <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
Subject: Re: Internal Modem
Date: Wed, 30 Aug 2000 23:33:08 GMT
Jack Warren wrote:
>
> I have an IBM Aptiva with a Conexant HCF v90 56 data fax PCI modem.
>
> Linux finds it but can't dial out using this modem.
>
> Can anyone offer any ideas??
>
> Thanks in advance
>
> J
One word: winmodem.
More words: Linux doesn't like winmodems, so you'll need a different modem.
See http://www.linmodems.org/ for more info.
J-P Stewart
------------------------------
From: Andrey Vlasov <[EMAIL PROTECTED]>
Subject: Re: Diamond Viper II Video Card--- HELP, I NEED A DRIVER
Date: Wed, 30 Aug 2000 16:31:59 -0700
Hi Andrew,
if I am mot mistaken Viper II should use TNT2 chipset. Just try to configure it
as any Video Card based on TNT2 chipset.
Andrey
Andrew O Davis wrote:
> I have a diamond viper II 32 mb AGP video card. My motherboard, Abit BE6-II
> came with a version of Redhat Linux 6.2 that supports the AGP and onboard
> Ultra 66 controllers. Unfortunately when I install the OS I can only use 16
> colors because it couldn't find a compatible driver for my card.
>
> Can anyone tell me where I could find a driver that would work? Any and all
> suggestions are welcome.
>
> Andrew
------------------------------
From: Craig Setera <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.misc
Subject: Multi-session CD's without -eject (cdrecord)
Date: Thu, 31 Aug 2000 00:04:42 GMT
I'm interested in using multi-session CD's for doing backups. It
appears from the examples that multi-session uses the -eject option to
cause the CD to be ejected along the way. I'm assuming that this is so
that the OS re-reads the table of contents on the disc.
I'd really like to do this in some way that does not require the disc to
be ejected and reloaded. Can multi-session be achieved without the CD
eject in any way?
Thanks,
Craig
(Remove nospam from address to reply by mail)
------------------------------
From: [EMAIL PROTECTED] (Dave Blake)
Crossposted-To: alt.os.linux,comp.os.linux.development.apps
Subject: Re: Copying DVDs
Date: 30 Aug 2000 23:42:15 GMT
Reply-To: [EMAIL PROTECTED]
Cameron Hutchison <[EMAIL PROTECTED]> wrote:
> On 30 Aug 2000 13:42:36 GMT, Dave Blake <[EMAIL PROTECTED]> wrote:
> >DVDs consist of movie material and encryption key.
> >The key resides in a special sector on the disk that is
> >pre-written to all zeros on blanks.
> But, if you could decrypt the movie you are copying (DeCSS), couldn't
> you the write an unencrypted copy of the movie without needing to
> write to the key sectors?
> Or is it not possible to burn movies to a DVD-R(AM), even
> unencrypted?
Ahh, but there is the rub. Can it be played in a DVD player if
it is not encrypted? That is a question to which I do not know
the answer. I suspect not, otherwise why bother with the
encryption at all ? It is very weak encryption, and the DVDCCA
had to know it would be broken. It serves to control the PLAYER
market and REGIONAL distribution of the DVDs, without providing
much copyright control at all. If DVD players would play
unencrypted DVDs, that would mean that someone who pirated a DVD
by breaking the encryption could easily print a DVD that was
playable all over the world (thus defeating REGIONAL distribution
control), and could play the movie in any format he chose except
DVD (thus defeating the PLAYER market control).
--
Dave Blake
[EMAIL PROTECTED]
------------------------------
From: Andrey Vlasov <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.help
Subject: Re: Linksys LNE100TX weird behavior???
Date: Wed, 30 Aug 2000 17:13:28 -0700
Robert,
I am not sure that it will help as I do not have enough information but
"Do you have PnP OS BIOS setting disabled?" . If not try to disable it and
boot system again - in most case PnP BIOS create many problems - better to
keep it in off (At least for kernels before 2.4 which support PnP)
Andrey
"Robert E. Blair" wrote:
> I have had a Linksys Etherfast PCI card in my system for a few years
> now. It always worked fine - the system is triboot (linux,NT,W95). I
> got a cable modem and out of paranoia upgraded the kernel to the latest
> version from Redhat (2.2.16-3). Everything is fine BUT the ethernet
> card basically went dead. The tulip driver loads fine, but there is no
> response to pings to a neighbor machine. The hardware still worked as
> verified by boot another OS.
>
> Here's the weird thing. In trying to solve the problem I discovered
> that if I ran ntop (the ethernet sniffer) the card suddenlly worked.
> Tipped off by that I tried loading the driver, initiating the network
> start and did a "/sbin/ifconfig eth0 -promisc" and sure enough the card
> works fine! It appears to be very reproducible. Before I put this in
> my network startup file, anyone have a similar experience? Anyone have
> a clue as to why this might be?
>
> Any hints would be appreciated.
>
> --
> *C~o~()*
> Cc{*(o~*Q& Bob Blair
> ( (( )
> |~ ~ | Argonne National Lab.
> |O - | Room E277, Bldg. 362
> \ " / High Energy Physics Div.
> \ / 9700 S. Cass Ave.
> . ^u^ . Argonne, IL 60439
> ._. Phone (630)-252-7545
> Fax (630)-252-5782
> Yes! I shaved! email: [EMAIL PROTECTED]
------------------------------
From: [EMAIL PROTECTED] (Christopher Browne)
Subject: Re: Will this computer run Linux????
Reply-To: [EMAIL PROTECTED]
Date: Thu, 31 Aug 2000 00:18:42 GMT
Centuries ago, Nostradamus foresaw a time when Mark would say:
>I want to buy this computer from Micron and install Windows ME and Linux.
>Will I be able to install Linux with these hardware options?
>
>INTEL PENTIUM III PROCESSOR 667MHZ
> 128MB 133MHZ SDRAM-1 DIMM
> 15GB ATA 100 7200RPM (ADDITIONAL)
> 30GB ATA100 HARD DRIVE (7200RPM)
> 12X40X VARIABLE SPEED DVD ROM WITH HARDWARE DECODER CARD
> 8X4X32 CDRW W/1 CD-REWRITABLE VALID W/WINME
> 1.44MB 3.5IN FLOPPY DRIVE
> 32MB NVIDIA GEFORCE 256 AGP CARD
> 17IN MICRON TRINITRON DISPLAY (16IN VIEWABLE, .25MM DP)
> CREATIVE LABS SOUND BLASTER LIVE VALUE
> ALTEC LANSING ACS33/ 3 PIECE SPEAKER SYSTEM
> 56K V.90 PCI MODEM
> 3COM 3C905C BROADBAND READY 10/100 PCI NETWORK CARD
> MICROSOFT INTELLIMOUSE
> MID-SIZE TOWER
> MICROSOFT WINDOWS ME
The most thorny thing that I'd see being any issue is the GeForce 256
card, and that if you are concerned about doing MESA/OpenGL stuff.
XFree86 3.3.6 supports the GeForce; see:
<http://www.xfree86.org/4.0.1/Status21.html#21>.
The other issue would be the modem. It is possible that it is a
"WinModem," in which case your options may be limited to none.
<http://www.o2.net/~gromitkc/winmodem.html>
<http://linmodems.org/>
Consider the possibility that you may have to buy an external modem.
--
(concatenate 'string "cbbrowne" "@" "ntlug.org")
<http://www.hex.net/~cbbrowne/hardware.html>
Rules of the Evil Overlord #151. "I will not set myself up as a
god. That perilous position is reserved for my trusted lieutenant."
<http://www.eviloverlord.com/>
------------------------------
From: [EMAIL PROTECTED] (Dances With Crows)
Crossposted-To: comp.os.linux.misc
Subject: Re: Multi-session CD's without -eject (cdrecord)
Date: 31 Aug 2000 00:22:16 GMT
Reply-To: [EMAIL PROTECTED]
On Thu, 31 Aug 2000 00:04:42 GMT, Craig Setera wrote:
>I'm interested in using multi-session CD's for doing backups. It
>appears from the examples that multi-session uses the -eject option to
>cause the CD to be ejected along the way. I'm assuming that this is so
>that the OS re-reads the table of contents on the disc.
>
>I'd really like to do this in some way that does not require the disc to
>be ejected and reloaded. Can multi-session be achieved without the CD
>eject in any way?
Depends on the particular CD-R(W) in question. Some can manage this,
some can't. Anyway, it seems as though most CD-R(W)s can retract the
tray automatically when the drive is accessed. Try ejecting the tray,
then issuing a "mount" command--for most drives, the tray will slide in.
If you do end up having to eject, a simple mount/umount will slide the
tray back in. It's really easy to script, and would take about 10
seconds....
--
Matt G|There is no Darkness in Eternity/But only Light too dim for us to see
Brainbench MVP for Linux Admin / Those who do not understand Unix are
http://www.brainbench.com / condemned to reinvent it, poorly.
=============================/ ==Henry Spencer
------------------------------
From: as <[EMAIL PROTECTED]>
Subject: Help building a Duron 600/K7V system
Date: Thu, 31 Aug 2000 00:58:17 GMT
Hi,
I've been running linux on my old dell for a while now, and finally
decided to upgrade. I'm used to swapping out cards, adding RAM and
drives, so I figured I'd go ahead and build my own system. I must
confess I've run head first into a brick wall.
I have an Asus K7V and a Duron 600. I put everying together
according to the manual (and the Ars system building guide) and powerd
it on for the first time with just the cpu, memory, keyboard, and video
card. . . and nothing happened. Oh, the fans came on and the system led
on the mobo came on, but i didn't get a signal to my monior. I didn't
get the BIOS. I didn't even get the usual bios error beeps.
Disappointed, I exchanged the processor and mobo for two of the same.
And the same thing has happened.
What am I doning wrong? Has anyone out there had this problem? Any
ideas?
Thanks,
Jimmy Renteria
P.s.
My email is [EMAIL PROTECTED] Email me if you need/want more
info.
------------------------------
From: "Chris Severn" <[EMAIL PROTECTED]>
Crossposted-To: alt.os.linux,comp.os.linux.development.apps
Subject: Re: Copying DVDs
Date: Thu, 31 Aug 2000 09:11:52 +0800
"Dave Blake" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> Cameron Hutchison <[EMAIL PROTECTED]> wrote:
> > On 30 Aug 2000 13:42:36 GMT, Dave Blake <[EMAIL PROTECTED]> wrote:
>
> > >DVDs consist of movie material and encryption key.
> > >The key resides in a special sector on the disk that is
> > >pre-written to all zeros on blanks.
>
> > But, if you could decrypt the movie you are copying (DeCSS), couldn't
> > you the write an unencrypted copy of the movie without needing to
> > write to the key sectors?
>
> > Or is it not possible to burn movies to a DVD-R(AM), even
> > unencrypted?
>
> Ahh, but there is the rub. Can it be played in a DVD player if
> it is not encrypted? That is a question to which I do not know
> the answer. I suspect not, otherwise why bother with the
> encryption at all ? It is very weak encryption, and the DVDCCA
> had to know it would be broken. It serves to control the PLAYER
> market and REGIONAL distribution of the DVDs, without providing
> much copyright control at all. If DVD players would play
> unencrypted DVDs, that would mean that someone who pirated a DVD
> by breaking the encryption could easily print a DVD that was
> playable all over the world (thus defeating REGIONAL distribution
> control), and could play the movie in any format he chose except
> DVD (thus defeating the PLAYER market control).
>From following numerous discussions on slashdot, I'm sure that it's
perfectly acceptable to produce a non-encrypted DVD. It must be - or
there'd be no point having writable DVDs that you can't encrypt.
It is up to the manufacturer of the DVD to decide whether he wants to
encrypt that DVD. All players can read from unencrypted DVDs. There would
be plenty of people who wanted to produce their own little movie or some
such that they want to allow to be played in any region (advertising people
showing promotions, demo disks etc). There must be a way to allow this.
Chris Severn
--
Delete the 'x' to remove the spamblock.
Except spammers, for whom my email address is abuse@localhost
------------------------------
From: "Darren and Marla Welson" <[EMAIL PROTECTED]>
Crossposted-To:
alt.linux,alt.os.linux,comp.os.linux,comp.os.linux.networking,comp.os.linux.setup,linux.redhat.install,linux.redhat.misc
Subject: Re: 2nd NIC failure
Date: Thu, 31 Aug 2000 01:22:46 GMT
Had a "SLOT" I/O conflict that did not show up in the /proc/ioports or
/proc/interrupts file. I moved the NIC and all is now well with my PC.
"Dave Addison" <[EMAIL PROTECTED]> wrote in message
news:8o0a0m$na7$[EMAIL PROTECTED]...
> Have you (or linuxconf) added an alias entry to /etc/conf.modules to tell
> the kernel which module should be loaded for eth1?
>
>
------------------------------
From: Arcana <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.questions,comp.os.linux.help
Subject: ne.o: fails to initialize in Corel Linux 1.2 (Second Edition)
Date: Thu, 31 Aug 2000 01:53:29 GMT
Hello!
Summary: ne.o card won't initialize as eth0.
Version: Linux 2.2.16, Corel Linux 1.2 (Second Edition), based off of Debian 2.1
NIC: Kingston KNE2031+ (ne2000 compatible)
Detailed description:
I have a Kingston 2031+ (ISA) ethernet card. On the Kingston website
(http://www.kingston.com), the card is categorized under the KNE20xx+ series,
and is therefore ne2000 compatible. Using a Win98 boot disk, I used Kingston's
autoset.exe program to set the required I/O address and IRQ. I set them as
follows:
io=0x300
irq=10
This setup works fine in Windows 98 (and used to work in Corel Linux 1.1).
I have a Corel Linux 1.2 system (based off of Debian slink, with some potato
packages) which (unfortunately) failed to detect the card on startup, and
therefore left me to add it manually.
I edited the /etc/modutils/aliases file and added the following lines to the
bottom:
alias eth0 ne
options ne io=0x300
Now, when do a "modprobe eth0" or a "modprobe ne io=0x300", I get the following:
/lib/modules/2.2.16/net/ne.o: init_module: Device or resource busy
When I do "dmesg | tail", I get the following:
ne.c:v1.10 9/23/94 Donald Becker ([EMAIL PROTECTED])
NE*000 ethercard probe at 0x300:<6>
(cdl:ne.o)NE2000 found at address 0x300, using IRQ 10.
ne.c: No NE*000 card found at i/o = 0x300
What I find infuriating about the problem (other than the fact it used to work
under Corel Linux just fine) is that the error message contradicts itself.
Just to see if I made a mistake, I downloaded Donald's ne2000 diagnostic tool
and ran it for 0x300, which reported:
Checking the ethercard at 0x300.
Receive alignment error counter (0x30d) is ff
Passed initial NE2000 probe, value 00.
Station Address PROM 0: 00 00 c0 c0 f0 f0 06 06 aa aa a5 a5 05 05 f5 f5
Station Address PROM 0x10: 00 00 00 00 00 00 00 00 00 00 00 00 57 57 57 57
NE2000 found at 0x300, using start page 0x40 and end page 0x80.
The current MAC stations address is 00:00:00:00:00:00.
The interesting thing here is that although there's an ethernet card at 0x300,
the MAC stations address is all 0's which doesn't seem normal.
Does anyone here know what's wrong, or what I can do about this problem? I used
to be able to initialize the exact same card in the exact same machine (using a
different kernel) just fine. Admittedly, the configuration wouldn't work until
I installed the 2.4 test 4 kernel... I haven't tried recompiling the ne driver
yet.
Help would be appreciated!
--
Arcana, E-mail: [EMAIL PROTECTED]
--NOTE: The E-mail address in the reply-to field is deliberately
false. Do not reply directly to this message. Send an E-mail
to the address listed above.
===== ===== * ===== =====
Tales of Midgar - FF VIIL http://midgartales.tripod.com
Pern - Araby Weyr: http://Araby.tripod.com/
FF7 - Tales of Midgar: http://ArcanaTxM.tripod.com/
Xenogears - DeM: http://project_xat.tripod.com
------------------------------
From: Maniac <[EMAIL PROTECTED]>
Crossposted-To: alt.os.linux.mandrake,comp.os.linux.setup
Subject: Re: why lots of bad hardware suddenly discovered upon linux installations?
Date: Wed, 30 Aug 2000 21:01:15 -0500
Dan Jacobson wrote:
> Often I see postings like
>
> > > Well I am exhausted. I am forced to accept the reality, Mandrake 7.1
> is
> > > beyond my abilities. To those who have installed Mandrake 7.1 you have
> > > my complete admiration. With more than 25 years of computer
> experience,
> > > much of it in Unix, I am totally defeated.
>
> > What errors do you get? Signal 11 or 7 can mean you have a bad memory
> chip
> > in RAM or cache. Refusal of X to test/start can be an unfriendly video
> > card. Do you get disk geometry errors? Are you using anything SCSI? Have
> > you tried an install with the system stripped to the bare essentials?
>
> True, good possibilities, but I still see a lot of postings where lots of
> bad hardware is suddenly discovered upon Linux installations... One would
> wonder why didn't these problems didn't appear before they changed from
> other leading brand OS...
Probably because that other OS is more tolerant of "bad" hardware and
doesn't use all of the functionality of it or doesn't test the hardware as
much.
OR the other OS doesn't stay running long enough for the hardware to get
"tired" and say enough already! :)
--
[EMAIL PROTECTED] 40.619302 N, 96.956676 W
A single tasking guy in multi tasking world.
------------------------------
From: "Chan Chung Hang Christopher" <[EMAIL PROTECTED]>
Subject: Re: Kernel Option for PIII Processor?
Date: Thu, 31 Aug 2000 09:59:10 +0800
Maybe Pentium II/III and SMP support might be better? Pentium II/III are
newer versions of the Pentium Pro with MMX btw.
Tkrin wrote in message <789r5.321902$[EMAIL PROTECTED]>...
>I recompiled my kernel for my PIII processors and noticed that my time for
>processing SetiAtHome data became slower by two hours. I selected the
>Pentium Pro (6x86) option for my setup. Should I have selected one of the
>other processor options instead?
>
>I am running Mandrake 7.1 on a dual PIII 866 w/ kernel 2.2.16.
>
>Thanks.
>
------------------------------
From: "Ken Crofts" <[EMAIL PROTECTED]>
Crossposted-To: aus.computers.linux,comp.os.linux.networking,comp.os.linux.portable
Subject: Re: Xircom realport driver on RH 6.2
Date: Thu, 31 Aug 2000 12:05:29 +1000
"Alistair Mann" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> "Ken Crofts" <[EMAIL PROTECTED]> wrote in message
> news:[EMAIL PROTECTED]...
> > I have installed Linux Red HAt 6.2 Toshiba Satellite 4100XDVD laptop. I
> > wish to use Xircom Realport 10/100 CE3 card. From reading David Hinds
> > PCMCIA-Howto it suggests card is compatible with Linux. I have loaded
> > xirc2ps_cs module, and this module appears when I type in lsmod. When I
> > type in cardctl ident it identifies card. however when I insert or
remove
> > card it gives a high beep then a low beep which I believe indicates card
> is
> > not configured properly.
> >
> > The problem I have is when I use the Kernel Daemon Configuration from
teh
> > ControlPanel it asks me to select type and module. I select type as
> "eth",
> > but when I go to select module there appears to be no driver for xircom
> > card. Does anyone know what name of module should be, and whether I
need
> > to copy anything into lib/modules/2.2.14-12/net/ directory. I am
> relatively
> > new to Linux so fairly simple instructions would be appreciated.
>
> A high beep and a low beep means the PC Card was recognised properly but
> that the software needed to actually use it failed. The reason for that
> failure would normally be written to /var/log/messages.
>
> Try it again, then immediately look at the log. This will give you (and
> perhaps us) more insight into what the failure is.
>
> As far as the control panel is concerned, my one (with a Xircom XEM5600
and
> xirc2ps_cs/serial_cs) filled in automagically with the tulip driver.
>
> HTH
> --
> Alistair Mann
> visit the uk.local.london website at
> http://www.london-online.org.uk
>
>
Messages were:
shutting down socket 0
executing : './network start eth0'
executing: 'rmmod xirc2ps_cs'
initializing socket0
socket0: Xircom CE#-10/100 Fast Ethernet
executing: 'insmod /lib/modules/2.2.14-12/pcmcia/xirc2ps_cs.o
xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (ddjn+kvh)
Xircom: port 0x300, irq 5, hwaddr 00:10:A4:FA:F4:C2
executing: 'network start eth0'
MII link partner: 0021
MII selected
media 10baseT, silicon revision 4
Would appreciate any further advice.
Thanks,
Ken
==========================================================
CAUTION - Any views expressed in this message are those of
the individual sender and may not necessarily reflect the
views of Department of Public Works and Services
==========================================================
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.hardware) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Hardware Digest
******************************
