hi, i am using bttv with my FlyVideo II TV card, under mandrake9 (decided to play with it for a while, i used debian until not to long ago..). its mandrake's default kernel (2.4.19-16mdk). i had a SB128 sound card until 2 days ago (es1371) and it worked fine. yesterday I've purchased SB Live! (emu10k1) and the problems started : the default bttv driver (in mandrake's kernel) is loading, but i cant get any reception (no channels are displayed, even when scanning). i tried to compile and install the latest bttv driver, and after it loads, all it displays is a blank screen (both in XawTV and Zapping). are there any known issues with bttv and emu10k1 ?
here are some of the settings : # lsmod |grep bttv bttv 66880 0 (unused) i2c-algo-bit 7432 1 [bttv] videodev 5792 2 [bttv] i2c-core 15332 0 [bttv i2c-algo-bit tuner] soundcore 3780 0 [bttv emu10k1] # cat /etc/modules.conf |grep bttv options bttv radio=1 gbuffers=4 card=19 tuner=5 pll=1 card model : 02:09.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 12) when modprobing for bttv, it loads with no errors. thanks, -- ====================================== Amir Tal Founder, Owner Whatsup, Hebrew Linux Portal Voice: +972-8-9363164 Fax: +972-8-9363164 Cell: +972-58-978979 Email: [EMAIL PROTECTED] URL: www.whatsup.org.il ====================================== ================================================================To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
