ok, try this: as root - do: v4l-conf -c /dev/video0 (or whatever your video device is - I don't really like devfs so much). then try to use xawtv and paste any errors if you get..
Hetz On Friday 11 October 2002 22:09, Amir Tal wrote: > hi, > > i am using bttv with my FlyVideo II TV card, under mandrake9 (decided to > play with it for a while, i used debian until not to long ago..). > its mandrake's default kernel (2.4.19-16mdk). > i had a SB128 sound card until 2 days ago (es1371) and it worked fine. > yesterday I've purchased SB Live! (emu10k1) and the problems started : > the default bttv driver (in mandrake's kernel) is loading, but i cant get > any reception (no channels are displayed, even when scanning). i tried to > compile and install the latest bttv driver, and after it loads, all it > displays is a blank screen (both in XawTV and Zapping). > are there any known issues with bttv and emu10k1 ? > > here are some of the settings : > > # lsmod |grep bttv > bttv 66880 0 (unused) > i2c-algo-bit 7432 1 [bttv] > videodev 5792 2 [bttv] > i2c-core 15332 0 [bttv i2c-algo-bit tuner] > soundcore 3780 0 [bttv emu10k1] > > > # cat /etc/modules.conf |grep bttv > options bttv radio=1 gbuffers=4 card=19 tuner=5 pll=1 > > > card model : > 02:09.0 Multimedia video controller: Brooktree Corporation Bt848 Video > Capture (rev 12) > > when modprobing for bttv, it loads with no errors. > > thanks, ================================================================To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
